Variantenmanagement: Neue Aras-Anwendung ermöglicht Gleichteilestrategie bei maximaler Variabilität
Moderne Produktplattformen führen zu mehr Qualität, geringeren Kosten und kürzerer Time-to-Market
PLM-Lösung von Aras ermöglicht JTEKT mehr Flexibilität und Kalkulationssicherheit bei der Auftragsfertigung
Spezialist für industrielle Wärmebehandlungsanlagen optimiert sein Datenmanagement
Mehr Wunsch als Wirklichkeit
In der Frage nach dem digitalen Reifegrad überschätzen sich viele europäische Industrieunternehmen. Die Automobilbranche hebt sich vom Durchschnitt allerdings ab.
Schiffswartung: MacGregor erweitert mithilfe von Aras den Funktionsumfang seiner Monitoring-Lösung OnWatch Scout
Echtzeit-Analysen, noch mehr Benutzerfreundlichkeit und eine erweiterte Datenkontrolle
Aras von unabhängigem Marktforschungsunternehmen als führend im Product Lifecycle Management ausgezeichnet
Bestmögliche Bewertung in den Bereichen Compliance, Nachhaltigkeit, Green PLM Support, Digital Thread, Extended BOM, Software Bill und Varianten
Energiepreisspirale: Europas Industrie verschenkt enormes Einsparpotenzial
Die Hälfte des Verbrauchs kann noch eingespart werden
Der digitale Faden führt durchs Krisen-Labyrinth
Der Weg aus dem Labyrinth: Energiekosten, Inflation und Fachkräftemangel bereiten den Unternehmen weiterhin Sorgen. In einem Gastbeitrag für das Magazin RiskNET erläutert Aras-Geschäftsführer Jens Rollenmüller, wie Unternehmen mithilfe eines digitalen Fadens durch die Krise kommen.
GREEN DATA
Mit den zunehmenden Anforderungen an Unternehmen, über Klimaschutz, Compliance und Co. zu berichten, steigt auch die Menge der zu verarbeitenden Daten. Die beliebte Excel-Liste stößt irgendwann an Grenzen. Wie ESG-Managementsoftware helfen kann, strukturiert zu berichten – und Prozesse nachhaltig zu verbessern.
Europaweite Studie: Industrie stellt sich auf lang anhaltende Multikrise ein
90 Prozent der Unternehmen rechnen auch über 2023 hinaus mit großer Instabilität
Lückenlose Daten im Produktlebenszyklus
Produkt Lifecycle Management (PLM) ist eine wesentliche Voraussetzung für eine nachhaltige Kreislaufwirtschaft. Es hilft dabei, den Blick auf zusätzliche Qualitätsmerkmale in der Herstellung zu richten. Und nachhaltige Produkte haben besondere Qualität. Grammer zeigt, wie sich der Zusammenhang zwischen Nachhaltigkeit, Kreislaufwirtschaft und Qualitätsmanagement herstellen lässt.
Druckluft mieten statt Kompressoren kaufen
Bei Kompressor-Hersteller Tamturbo bilden produktbezogene Daten die Basis für den
Erfolg des Geschäftsmodells. Mit der PLM-Plattform von Aras stellen die Finnen sicher,
dass überall im Unternehmen Daten-Transparenz herrscht.
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Abschied von klassischer Produktfokussierung setzt Industrie unter Druck / Denken in Systemen bedingt stärkere interne und externe Vernetzung
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
ESG in der Industrie: Mit einem durchgängigen Datenmanagement die Nachhaltigkeitsziele erreichen
The Story Behind the Surprising Partnership Between AVEVA and Aras
Verdi Ogewell of Engineering.com shares his thoughts about Aras' strategic OEM licensing partnership with AVEVA, saying it is another recognition of the strength of the Aras Innovator platform and the joint venture with AVEVA is a feather in the cap for CEO, Roque Martin.
Industrial Digital Twin: AVEVA and Aras schließen strategische Partnerschaft
Gemeinsame Entwicklung von Lösungen für ein skalierbares Asset Lifecycle Management
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Laut der Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“ sind sich Deutschlands Unternehmen ihrer „Datenschätze“ zwar bewusst, schaffen es aber nicht, diese auch zu heben. Die Gründe reichen von fehlender Transparenz über Probleme bei der Konsolidierung bis hin zur immer noch vorhandenen Excel-Dominanz. Für die Studie hat die Produkt-Innovations-Plattform Aras mehr als 130 Top-Führungskräfte deutscher Unternehmen mit einem Umsatz von mindesten 100 Mio. Euro befragt.
Komplexe Entwicklungsprojekte mit Systems Engineering bewältigen
In nahezu allen Branchen werden Produkte heute immer intelligenter und enthalten immer mehr Software. Dadurch werden sie komplexer, ebenso ihre Entwicklung. Systems Engineering ist eine Denkweise, die bei Design und Fertigung dieser Produkte die Komplexität beherrschbar macht. Sie wird hier anhand von Beispielen aus der Automobilindustrie vorgestellt.
Automation und digitaler Zwilling im Schiffsbau: Sicher unterwegs auf allen Weltmeeren
Bureau Veritas, eine der wichtigsten Schiffsklassifizierungsgesellschaften und Offshore-Sicherheits- und Prüfstellen, hat sich für die PLM-Plattform Aras Innovator entschieden. Damit entwickelt das Unternehmen seine Prozesse für die Klassifizierung von Schiffen und Offshore-Anlagen weiter.
Wie ein PLM die Kreislaufwirtschaft abbildet
Die Automobilindustrie verbaut zunehmend nachhaltige und wiederverwertbare Materialien. Das Ziel ist eine vollständige Kreislaufwirtschaft. Um die damit verbundene Datenfülle beherrschen zu können, setzt der Zulieferer Grammer auf Product Lifecycle Management.
Von der Produktidee bis zur Zulassung – Aras-Plattform macht Medizintechnikunternehmen Ottobock innovativer und schneller
Product Lifecycle Management sorgt für effizienten, digitalen F&E-Workflow
Why Aras’ Roque Martin Bought Minerva, and the New Upcoming Ansys-Like Arrangements
Part two of Verdi Ogewell's conversation with Roque Martin and Peter Schroer explores the CEO transition, details about our recent Minerva merger, and the future of our platform.
Taking Aras PLM from a Thorn in the Side to a Real Threat
Aras’ founder, Peter Schroer, and CEO, Roque Martin, sat down with Verdi Ogewell of Engineering.com to discuss Aras’ growth among the other vendors in the market, what makes Aras and its platform stand out, and Roque’s mission as CEO.
Aras investiert in den Integrationsspezialisten XPLM, um Innovationen zu beschleunigen und weiterhin eine offene Connectivity -Lösung für Entwicklung und Produktion zu garantieren
Damit steht dem globalen Markt auch künftig ein starker, unabhängiger Anbieter für Connectivity-Technologien der nächsten Generation zur Verfügung.
Aras Invests in XPLM
CIMdata provides a brief overview of Aras’ investment in XPLM, saying that they are pleased to see that Aras is continuing to invest in openness that benefits the entire PLM economy including end user customers, ISV partners, and competitors alike.
Datenintegrität durch Automatisierung: IWT entscheidet sich für PLM-Lösung von Aras
Das Life-Science-Unternehmen organisiert über die Aras-Plattform kundenspezifische Anpassungen in der Produktion
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Ökologisches Produktdesign wird zum zentralen Hebel zur Erreichung der Nachhaltigkeitsziele / Der Einsatz recycelter Materialien legt weiter zu
Three steps to building a resilient enterprise ecosystem
Aras’ CRO, Rob McAveney, explains that if product data is used properly, it can deliver insights that allow businesses to pivot with agility when it needs to adapt to new requirements.
PLM-Trends 2022: Systeme, Kreisläufe und noch mehr Tempo
Das Product Lifecycle Management ist wichtig, um den Lebenszyklus eines Produkts zu dokumentieren. Im Zuge der Digitalisierung verschmelzen ehemals gezogene Grenzen zu ERP- und anderen zentralen Unternehmensanwendungen zunehmend. Auf welche Entwicklungen gilt es hier zu achten?
Studie „Challenges 2022“
Erst jedes dritte Unternehmen ist gut auf das neue Lieferkettengesetz vorbereitet
Aras peilt PLM-Marktführerschaft an
Für Aras brachte 2021 viele Neuigkeiten. Neue Investoren haben die Mehrheit der Anteile übernommen und das Vorstandsteam wurde neu aufgestellt. Könnte Aras in den kommenden Jahren zu einem neuen Schwergewicht in der PLM-Branche werden? Die wichtigsten Punkte in Kürze und ein Gespräch mit dem Vizepräsidenten für Europa, Stéphane Guignard.
Studie „Challenges 2022“
In zwei von drei Unternehmen sind die Prozesse mit dem aktuellen Veränderungstempo überfordert / Veränderungsbedarf und Veränderungsfähigkeit gehen immer weiter auseinanderg
Aras Announces Merger of Minerva Group (Highlight)
CIMdata provides a brief overview Aras’ merger of Minerva, saying this is a great addition for Aras, offering better support for out-of-the-box implementations within specific industries and helps increase Aras’ top line revenue.
Breaking News: Aras PLM Takes Over Its Main Partner Minerva
Verdi Ogewell of Engineering.com says Aras’ merger of Minerva will enable the company to position itself to better solve complex digitalization challenges in technology, manufacturing and the supply chain. At the same time, the added expertise in vehicle, aerospace, defense and industrial equipment manufacturing will benefit customers moving forward.
Aras übernimmt Minerva Group
Synergie & Funktionalität auf höchstem Niveau für die Branchen Medizintechnik und High-Tech-Elektronik
Spitzenposition ausgebaut: Aras verkürzt die Release-Frequenz für seine PLM-Softwareplattform
Neue Version „Aras Innovator 14“ beschleunigt Innovationen und Time-to-Value
Kendrion setzt auf Aras Enterprise SaaS als digitalen Backbone
Cloud-basierte Aras DevOps-Prozesse schaffen neue Möglichkeiten für kontinuierliches Wachstum
Aras ernennt Roque Martin als neuen Chief Executive Officer
Mit Roque Martin kommt ein erfahrener Branchenexperte zu Aras; Peter Schroer wird Mitglied im Board of Directors
Aras begrüßt den ehemaligen Ansys Chairman und CEO James Cashman im Board of Directors
Cashmans Führungserfahrung im Ausbau von Unternehmen unterstützt die rapide Expansion von Aras
ERP-Migration Nutzen, um PLM zu stärken
Bei Abkündigung ihrer bestehenden lokalen ERP-Installation sind aktuell viele Unternehmen gezwungen, auf eine neue, mitunter Cloud-basierte Plattform zu migrieren. Der Wechsel bietet die Chance, das Zusammenspiel zwischen ERP und PLM neu zu definieren. Doch dazu benötigen sie eine flexible PLM-Plattform.
plastverarbeiter-20210825
Der strukturelle Aufbau für eine schnellere digitale Transformation ist für die kunststoff- und kautschukverarbeitenden Branchen essentiell. Die Antwort liefert ein robustes und zukunfstfähiges Product Lifecycle Management (PLM) in der Cloud.
Der Digital Thread benötigt echtes Model-Based-Engineering
Für den Digital Thread existiert eine besonders ehrgeizige Vision: Er soll eine maßgebliche und nachvollziehbare Rückverfolgbarkeit (Traceability) aller Konstruktionsbereiche – Anforderungen, Funktionen, Use Cases, Testfälle und weitere Artefakte – entlang des gesamten Produktlebenszyklus herstellen.
PLM: Standardsoftware ist nicht die Antwort
Viele Anbieter im Bereich PLM (Product Lifecycle Management) preisen ihre Lösung damit an, dass sie out-of-the-box als Standardsoftware funktioniert. Das soll in der Theorie die Zusammenarbeit zwischen Herstellern und ihren externen Stakeholdern wie OEMs oder Zulieferern vereinfachen. In der Praxis sieht es jedoch oft anders aus: Denn der Einsatz von Standardsoftware wird den individuellen Anforderungen, die jedes Unternehmen mit sich bringt, nicht gerecht. Stattdessen benötigen Unternehmen ein offenes sowie flexibles PLM-System, das Freiraum für Anpassungen bietet – so können sie den einzigartigen Produktlebenszyklus abbilden sowie rückverfolgen und die Zusammenarbeit über die gesamte Lieferkette hinweg verbessern.
Resilientes PLM – Digitalisierungsschub für die Unternehmenszukunft
Deutschland ist Datenland. Das geht aus einer aktuellen Studie von accenture hervor, in der ein Vergleich mit dem globalen Wettbewerb gezogen wird. Eine wichtige Erkenntnis ist, dass Unternehmen derzeit ihre Prozesse weltweit digitaler aufstellen. Dennoch gehen die Organisationen in Deutschland zögerlich im Vergleich zu anderen Ländern vor. Kern-Unternehmensprozesse werden nicht schnell genug digitalisiert, was sowohl die Skalierung als auch die Veränderung des Unternehmens behindert. Um sich angesichts des wachsenden Wettbewerbsdrucks durch digitale und internationale Player zukunftssicher aufzustellen, sollten produzierende Unternehmen Strukturen aufbauen, mit denen sie sich flexibel an den Markt anpassen und zeitgleich nachhaltige Geschäftserfolge erzielen können. Einen Schwerpunkt in der digitalen Transformation ihrer Organisation sollten sie daher auf ein zukunftsfähiges und robustes Product Lifecycle Management (PLM) legen.
PLM-System: Wie es die digitale Transformation unterstützt
Bislang ging es bei der digitalen Transformation hauptsächlich darum, Technologien der Industrie 4.0 nutzbar zu machen. Damit waren durchaus ehrgeizige Ziele verbunden. Leider erfüllten die Projekte die hohen Erwartungen oft nicht. Vor allem große Unternehmen kämpfen mit der Modernisierung ihrer über Jahre gewachsenen Technologie-Stacks und den Kosten für die Vereinfachung ihrer IT-Anwendungen und der IT-Infrastruktur. Wie sich das ändern lässt.
Aras sichert sich umfangreiche Wachstumsinvestition von GI Partners
Kapitalanlage stärkt die weitere Innovation der Low-Code-Plattform von Aras, die globale Expansion und den Kundenerfolg
Aras erweitert sein Subscription-Angebot um Enterprise SaaS
Zusammen bieten Enterprise SaaS und DevOps für globale Unternehmen eine leistungsfähige Cloud-first-Plattform mit unbegrenzter Anpassungsfähigkeit
Aras Simulation Management bietet Anwendern höhere Skalierbarkeit, Flexibilität und offene Konnektivität
Applikation ermöglicht Systemexploration und -verifikation über den gesamten Lebenszyklus
Aras Systems Architecture verbindet MBSE mit Digital Thread über den gesamten Lebenszyklus
Neue Anwendung führt Systemmodelle aus verschiedenen Tools zu einer Gesamtsystemarchitektur zusammen
Resilient PLM - Produktlebenszyklus im PLM sicher abzubilden zahlt sich aus
Viele Unternehmen haben nicht rechtzeitig reagiert beim Umsetzen digitaler Trends – und wurden von den Ereignissen 2020 überrollt. Jetzt müssen sie Strukturen aufbauen, mit denen sie sich an geänderte Begebenheiten anpassen können. Der Schlüssel liegt in einem resilienten PLM.
Diese fünf Fallstricke lauern bei der digitalen Transformation
Innovationszyklen für Produkte und Dienstleistungen gewinnen stetig an Tempo, doch viele Hersteller können mit ihren veralteten, starren Product-Lifecycle-Management-Systemen nicht Schritt halten. Um die Vorteile der Industrie 4.0 voll auszuschöpfen, benötigen sie stattdessen eine flexible, resiliente Architektur.
Keynotes von Toyota Motor Europe, Cubic Corporation, US Department of Defense, Insitu und CIMdata
Aras Digital ACE 2021: Best Practices für die unternehmensweite digitale Transformation
Haulotte schafft mit Aras einen echten Enterprise Digital Thread
Plattform für die unternehmensweite digitale Transformation sichert nachhaltige Geschäftserfolge
Per Digital Twin zur erfolgreichen Predictive Maintenance
Der Digital Twin einer Anlage kann für die Instandhaltung eine Hilfe sein, mögliche Fehler im Kontext zu erkennen und effektiv zu arbeiten. Lesen Sie, wie.
Wie PLM die Digitale Transformation unterstützt
Bislang ging es bei der digitalen Transformation hauptsächlich darum, Technologien der Industrie 4.0 nutzbar zu machen. Damit waren durchaus ehrgeizige Ziele verbunden. Leider erfüllten die Projekte die hohen Erwartungen oft nicht. Vor allem große Unternehmen kämpfen mit der Modernisierung ihrer über Jahre gewachsenen Technologie-Stacks und den Kosten für die Vereinfachung ihrer IT-Anwendungen und der IT-Infrastruktur. Wie sich das ändern lässt.
PLM-Plattform: Produktentwicklung am Puls der Zeit
Immer kürzere Innovationszyklen und zunehmend komplexe Produkte bringen klassische PLM-Lösungen an ihre Grenzen. Wer Schritt halten will, benötigt eine digitale Plattform, die alle Abläufe flexibel und zukunftssicher unterstützt.
Digital Twin – die Zukunft in der Produktion
Digital Twins setzen sich zunehmend durch: Laut Gartner verwenden 75 Prozent der Organisationen, die IIoT (Industrial Internet of Things) implementieren, bereits den Digital Twin oder planen dies innerhalb eines Jahres zu tun. Das Konzept entwickelt sich so zu einem wichtigen Teil einer Predictive-Analytics-Strategie. Die meisten Organisationen sind jedoch noch nicht über das Pilotenstadium hinausgekommen und setzen es nicht in großem Maßstab ein. Warum aber ergreifen viele Unternehmen noch nicht die Möglichkeiten, die der Digital Twin ihnen bietet?
DENSO Corporation modernisiert mit Aras seine Infrastruktur
Globaler Mobilitätsanbieter setzt auf die Aras-Plattform, um die Datentransparenz im gesamten Unternehmen zu optimieren
The Modern Face of SPDM
As simulation-driven design becomes a core pillar of digital product development, a refreshed simulation product data management has come to light. This article highlights Ansys’ use of Aras Innovator to deliver a vendor-neutral and open approach to SPDM.
Enterprise low-code: The next step in low-code
Low-code software has been around for decades and, with every re-emergence, the expectations are high. This article highlights recent advancement in low-code known as enterprise low-code. Enterprise low-code platforms offer a more strategic approach to application development with a higher level of functionality than traditional low-code solutions.
Jede Zeile zählt
Low-Code-Lösungen, die in eine PLM-Plattform eingebunden sind, beschleunigen die Produktentwicklung, fördern Innovationen und ermöglichen ein umfassendes Management des Produktlebenszyklus.
Ottobock modernisiert mit Aras seine Forschung und Entwicklung
Ottobock wählt die Aras-Plattform, um Produktinnovation und Wachstum zu beschleunigen
Benefits of an Enterprise Low-Code Platform for Manufacturers
Manufacturers are turning to technology as they navigate the impact of the pandemic. Find out how an enterprise low-code platform enables manufacturers to digitally transform on a digital platform, improving agility and resilience.
Aras Continues to Extend Its Low-Code Platform Capabilities to Build Intelligent Automation
With the latest open release of Aras Innovator, Aras provides further capabilities and enhancements to manage complex product digital twins and integrations across the digital thread—boosted with low-code application administration, advanced configurability and custom app development.
Grammer AG entscheidet sich für die Aras Innovator-Plattform
Zukunftssichere Geschäftsabläufe und digitale Transformation
Aras Asserts Capabilities for Unit-Specific Digital Twin Configurations
Aras is competing for a very specific aspect of a digital twin initiative, a problem that hasn’t gotten much attention to date, but is absolutely critical for proper product operation analysis. Learn why Aras Digital Twin Core is a key differentiator.
Drei Neuheiten erleichtern die Arbeit mit 3D-Daten
Verbesserte Zusammenarbeit, weniger Aufwand für die Suche nach ähnlichen Produkten und frühzeitiges Interagieren mit den richtigen 3D-Daten – drei Produktneuheiten dazu stellen wir hier vor.
Neue frei verfügbare Version von Aras Innovator für eine beschleunigte digitale Transformation
Zahlreiche Updates für eine einheitliche und leistungsfähige Organisation der PLM-Abläufe und für das Arbeiten in Remote Teams
Digitalisiertes Produkt-Lebenszyklus-Management-Offen und zukunftssicher für die Produkte und Technologien der Zukunft
Die vierte industrielle Revolution ist kein leeres Schlagwort: Vernetzte und beschleunigte Märkte verlangen nach immer intelligenteren Produkten. Hersteller stehen vor der Aufgabe, diese in immer höherer Frequenz auf den Markt zu bringen und kontinuierlich zu optimieren. Das stellt das gesamte Produkt Lifecycle Management vor neue Herausforderungen. Nur ein erweiterter PLM-Ansatz, der nicht mehr nur CAD-zentriert ist, sondern alle Phasen der Produktentwicklung umfasst und digitalisiert, kann angesichts der neuen Herausforderungen helfen. In einem digitalisierten PLM sind Digitale Threads und Digitale Twins gemeinsam ein wichtiges Rückgrat, um Produkte zu entwickeln und dann kontinuierlich zu optimieren. Auf dieses haben verschiedensten Akteure Zugriff: Vom CAE-Experten über die Produktionsabteilung bis hin zum Service. Eine solche digitale Transformation des PLM kann dabei nur auf einer Plattformlösungen bauen, um sich flexibel an neue Anforderungen anzupassen. Nur sie bietet genügend Zukunftssicherheit, um mit der fortschreitenden Entwicklung von Markt und Technologien mitzuhalten.Fusce laoreet lobortis nulla, vel pulvinar felis lacinia id. Etiam dictum leo euismod aliquam feugiat. In vulputate pharetra elit vel iaculis. Sed a hendrerit arcu.
Dräger setzt auf Aras Innovator aus der Cloud
Eine moderne PLM-Plattform erleichtert die Digitalisierung der Geschäftsprozesse. Aras-Kunde Dräger, ein international führender Hersteller von Medizin- und Sicherheitstechnik, löst deshalb seine Oracle Agile e6-Installation durch Aras Innovator ab. Sowohl die neue PLM-Lösung, als auch die CAx- Anwendungen laufen künftig in der Cloud.Fusce laoreet lobortis nulla, vel pulvinar felis lacinia id. Etiam dictum leo euismod aliquam feugiat. In vulputate pharetra elit vel iaculis. Sed a hendrerit arcu.
Marc de Guiran ist neuer Chief Revenue Officer bei Aras
Marc ist eine internationale Führungskraft mit nachweislicher Erfahrung im Wachstum globaler Vertriebsgeschäfte
Aras kündigt neue Low-Code-Anwendung für Digital Twins an
Mit dem Digital Twin Core lassen sich digitale Simulationen von Produkten und Systemen in einer Vielzahl von Branchen erstellen und verwalten
Mehr Ordnung im Datenchaos: Moderne PLM-Ansätze in der Medizintechnik
Beim Product-Lifecycle-Management besteht in der Medizintechnik noch großer Nachholbedarf. Branchen wie der Anlagen- und Maschinenbau betreiben schon jetzt gezieltes Informationsmanagement. Oder sie integrieren Informationen über den ganzen Lebenszyklus eines Produktes hinweg mit Hilfe entsprechender Softwarelösungen. Im Medizinumfeld liegen aber noch immer Informationen vielfach nur in Form von Textdateien und Tabellenkalkulationen vor – von der ersten Idee über die Entwicklung, Produktion und die Wartung.
EIZO entscheidet sich für Aras
Der Anbieter von visueller Technologie wählt Aras aus, um Produktivität und Qualität durch digitale Fertigung zu steigern
Das Versprechen von Big Data
Unternehmen der Fertigungsindustrie sammeln große Mengen an Daten entlang des gesamten Lebenszyklus eines Produkts: von der Analyse der Anforderungen und dem System-Engineering über Design, Entwicklung bis hin zu Produktion und Service. Doch eine zu große Menge an Daten kann unüberschaubar und verwirrend wirken: Die Daten liefern keine Informationen mehr, sondern nur noch Rauschen.
Draeger setzt auf PLM-Plattform Aras Innovator
Produkte von Dräger wie etwa Atemschutz- und Gasmessgeräte für Feuer- und Grubenwehren schützen, unterstützen und retten Menschenleben. Mit der PLM-Plattform Aras Innovator will sich das Unternehmen für die Herausforderungen der Digitalisierung wappnen.
Strategische Partnerschaft: Aras lizenziert Plattform an ANSYS
Zusammenarbeit ermöglicht bessere Prozess- und Datenverwaltung für Simulationen. Digital Thread lässt sich über gesamten Lebenszyklus hinweg zurückverfolgen
Aras erweitert Low-Code-Plattform und vereinfacht Zusammenarbeit mit Lieferanten
Umfangreiche Updates steigern Produktivität der Mitarbeiter
Schnelle Expansion: Aras erhält 70 Millionen US-Dollar von Goldman Sachs
Silver Lake Kraftwerk an neuer Investment-Runde beteiligt; Goldman Sachs tritt Aufsichtsrat von Aras bei
Steigende Nachfrage nach Simulationen: Aras präsentiert Grundsätze
Offener, plattformbasierter Ansatz ermöglicht es, den vollen Nutzen aus Simulationen zu erschließen. Er verbindet den Digital Thread und ermöglicht den Digital Twin
Dräger setzt auf Aras PLM Plattform
Cloud-basierte PLM-Strategie bietet Grundlage für Drägers Wachstum
Neues Servicepaket von Aras steigert Effektivität in Fertigungsbetrieben
Mit Aras benutzerdefinierte Kriterien festlegen, Instanzen in einer dynamischen Datenstruktur verwalten und Entwicklungsprozesse verknüpfen
Die Future PLM-Thesen werden (endlich) entdeckt
Voraussichtlich mehr als 5.500 Mitarbeiter in verschiedenen Entwicklungsbereichen werden die Aras-Software bei der Planung, Disposition, Durchführung und Dokumentation von Fahrzeugversuchen einsetzen. Für die BMW Group ist insbesondere die hohe Flexibilität von Aras Innovator relevant. Die spezifischen Anforderungen aus dem Versuchsumfeld der BMW Group lassen sich mit Aras umsetzen, weil die PLM-Plattform nicht nur vorhandene Standardfunktionen liefert, sondern auch tiefgreifende Anpassungen zulässt, heißt es in der Pressemitteilung, die zweifellos mit BMW abgestimmt ist.
Das Gedächtnis des digitalen Zwillings
Auf Unternehmensebene finden sich, je nach Einsatzbereich, zahlreiche unterschiedliche Systeme. In diesem Wust gehen zwangsläufig auch Daten unter beziehungsweise deren Kontext geht verloren. Eine Product Innovation-Plattform kann dabei helfen, das Potenzial der anfallenden Daten zu nutzen und sie in den richtigen Kontext zu setzten.
BMW setzt auf Aras Innovator
In der Fahrzeugentwicklung setzt BMW auf ein neues PLM-System – Zunächst soll Aras Innovator im Versuchsmanagement der integralen Sicherheit zum Einsatz kommen.
Flexibles System: Bayrischer Automobilhersteller entscheidet sich für Aras
Neuer Kunde aus dem Automotive-Umfeld implementiert PLM-Applikation Aras Innovator
Aras kauft MRO-Funktionen von Infospectrum
Aras hat Impresa MRO von Infospectrum erworben. Die Lösung ermöglicht es Unternehmen, die Entwicklung und Wartung von Anlagen digital zu transformieren.
Aras PLM vereinfacht Varianten-Management in der Produktion
Neue Funktionen steigern die Produktivität, verbessern die Zusammenarbeit und die Teameffizienz
Aras von führendem Analystenhaus als „Leader“ im Product Lifecycle Management für produzierende Unternehmen eingestuft
Bestnoten in den Kategorien „Product Vision“, „Implementierung und Sustainability“, „Konfigurierbarkeit und Flexibilität“ sowie „Bill-of-Materials-Management“
Wo gibt es das noch? Aras präsentiert Produkt-Roadmap
Produkt-Roadmap und Release-Plan? Papierblöcke zum Mitschreiben? Im Vergleich zu den visionären Anwenderkonferenzen der großen Mitbewerber, die ich in den letzten Wochen besucht habe, war die Aras ACE 2017 in München geradezu erfrischend altmodisch. Was nicht heißen soll, dass Aras keine Vision hätte. Ähnlich wie Siemens PLM Software positioniert der 2000 gegründete „PLM-Newcomer“ seine Software als Product Innovation Platform, die Kunden bei der digitalen Transformation ihrer Geschäftsprozesse unterstützen soll; nicht nur in Entwicklung und Fertigung, sondern künftig auch im Kundendienst.
ACE 2017 Europe in München
Mehr als 300 Teilnehmer verzeichnete Aras bei der diesjährigen europäischen Kundenveranstaltung ACE 2017 Europe, die am 21. und 22. November in München stattfand. Eine deutliche Steigerung um fast 100 Teilnehmer gegenüber dem vergangenen Jahr.
Excel「アングラPLM」の限界、製造業に高まるプラットフォームの必要性
「ビジネスのデジタル化」「デジタルトランスフォーメーション(DX)」などの言葉は製造業でも無縁なものではない。自動運転車のような先進事例に対応していくためには、設計や情報管理のやり方も変わらなくてはならないとアラスジャパンの久次氏は訴える。
Boston Business Journal, “GE Ventures adds to $40M round for Andover industrial software company”
“To power the next wave of global industrial productivity, GE is investing in critical foundational capabilities for the Industrial Internet," Steve Taub, the managing director of advanced manufacturing and enterprise at GE Ventures, said in a statement.
New $40 Million Investment in Aras
Given the amount invested and the reputation of the investors, CIMdata sees this as well-deserved recognition of Aras’ position in the global PLM industry, as well as their future potential. Their innovative technology and business model are well proven at this point and continue to gain traction in the marketplace.
“On Par with the cPDm Leaders” – Why Aras is Recognized as a New Member of the PLM Elite
Aras has managed to produce a solution that effectively covers what tend to be weak spots in large corporation’s PLM environments: supplier collaboration and simplicity to upgrade. Add in the fact that there are no license fees (Aras is free to download) and it becomes obvious that the solution has a couple very hard-to-resist advantages.
PLM is Hot Again: Aras Announces $40 Million Investment
“Aras embodies this strategy with a game-changing platform and ‘SaaS Anywhere’ approach that has proven very compelling to customers, and we are excited about Aras’ next stage of growth." -Martin Fichtner, managing director of Silver Lake Kraftwerk.
T-Systems PDM Workbench 5.0 available
The T-Systems International PDM Workbench 5.0 is available and provides a bunch of new and improved functionality. New “Rep Types” can be defined as non-BOM relevant CAD Documents, e.g. “CAD_KIN” for kinematics. All “Rep Types” can be handled easily with the full CATIA-integrated GUI of PDM Workbench. A step to improve usability in large structures like Aerospace is the possibility to load just portions of a structure, but maintaining the geometrical context – hence reducing data traffic and load time in CATIA. Also the handling of configuration information is improved by enabling the handling directly within CATIA. Please visit our homepage to see the full list of new functionality in the release notes.
T-Systems PDM Workbench 6.0
The T-Systems International PDM Workbench 6.0 is available and provides a bunch of new and improved functionality. Focus with this release was improving download performance by enabling the release cached. Now it is possible to save even more time for the designers. Also options for only loading visualization is available. Please visit our homepage to see the full list of new functionality in the release notes.
Aras Extends Digital Thread into Manufacturing and Service with Latest Open Release of Aras PLM Platform
“With this latest release of Aras Innovator, we continue to expand the Aras PLM Platform, whether building out the Quality Management System application for the specific needs of quality professionals or extending the platform to connect Engineering, Manufacturing, and Service to enable Digital Thread."
Aras Innovator Updated for Quality Management
Quality management professionals face the challenge of quickly responding to quality issues and communicating change requirements enterprise-wide. The new Quality Systems (QS) component in Aras QMS connects the proactive and reactive aspects of quality management, and fully integrates quality processes into engineering and manufacturing.
Aras Outlines its Platform Approach to PLM at ACE 2017 Conference
"We are on fire, the company, since about 2013-2014 has been growing,” said Aras CEO Peter Schroer during his ACE 2017 keynote presentation in front of a slide showing a 51% compound annual growth rate. “I gotta say … it’s because of you guys. The community is pushing us to continue to expand the product, build the scalability, build out the partner community so we can cover you everywhere. I would say the switch to open source, the opening up of everything we do — it’s an experiment and it’s played out perfectly.”
Aras PLM Platform Intended to Extend Digital Thread into Manufacturing and Service
Aras Quality Systems enables Closed-loop corrective action/preventive action (CAPA) – accelerates identification, containment, and analysis of issues, and tracking of affected items; Root cause analysis (RCA) – offers a variety of RCA tools; fault tree analysis, fishbone analysis, and five whys; collaboration – supports quality review through Visual Collaboration, business rules and workflow, and aggregation and packaging of CAP items; and Reporting – provides 8D reporting and tracking of CAPA metrics (% closed, % due).
Former Siemens PLM CEO Joins Aras
Even more surprising is the announcement from Aras CEO Peter Schroer that the company has appointed Tony Affuso, Siemens PLM's former CEO and a seasoned PLM expert, to its Board of Directors. Tony Affuso was the one responsible for pushing through the deal in which Siemens acquired UGS. This purchase added NX and I-deas (high end CAD), Solid Edge (mainstream CAD), Teamcenter (PDM/PLM), Nastran and Femap (CAE), Tecnomatix and more to the Siemens portfolio.
Hitachi Selects Aras to Standardize Design, Development Processes
Hitachi Industrial Equipment Systems Co., Ltd. has selected Aras Innovator to standardize management of drawings, data, design and development processes of the company’s wide portfolio of products. After implementation with Aras Certified Partner Hitachi Systems, Aras will standardize processes in engineering data management and workflow management across the company’s main manufacturing plants in Japan, Thailand and China.
SofTech Group Connector 7.1 Available
The SofTech Group Connector 7.1 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Group Connector 7.1 has been validated with Aras Innovator 11.0 SP7-SP9; along with Autodesk AutoCAD and AutoCAD Mechanical (2015, 2016, 2017); Autodesk Inventor (2015, 2016, 2017); and SolidWorks (2015, 2016, 2017). For additional information on the SofTech Group Connectors including datasheets and videos, please visit: http://www.softechgroupinc.com/products/softech-group-connectors
Huntington Ingalls, Microsoft und IBM präsentieren auf Kundenkonferenz ACE 2017 von Aras
Vertreter der Produktentwicklung, IT und Fertigung diskutieren über IoT, Digital Thread und die digitale Transformation in den USA
Schaeffler Gruppe setzt auf Aras als Plattform für Engineering Cockpit mit 20.000 Usern
Führender Automobil- und Industriezulieferer schafft Voraussetzungen für IoT mit Aras als PLM Backbone
Aras Announces Huntington Ingalls, Microsoft, and IBM to Headline ACE 2017 Customer Conference
Each year, ACE brings together global industry and technology leaders to exchange best practices on managing complex product development and transforming the science of engineering to the business of engineering.
Aras Announces Huntington Ingalls, Microsoft, and IBM to Headline ACE 2017 Customer Conference
Aras today announced key industry presentations and sessions for ACE 2017, the company’s marquee customer conference taking place on March 21st to 23rd in Nashville, TN. The gathering is the premier event that connects the most innovative product development, IT, and manufacturing teams from Automotive, Aerospace & Defense, High Tech Electronics, and Industrial Manufacturing to shape the future of PLM.
Aras Announces Industry Presentations for ACE 2017
ACE 2017 features business presentations from Huntington Ingalls, Microsoft, Valley Fine Foods, IBM, Akrapovič, Carestream, Sandia, Lord, Pabst, and other industry leaders. In addition, application and demo tracks feature overviews of the latest version of the Aras PLM Platform, including MPP, Tech Docs, and Quality Management, and presentations on PLM implementation strategy.
Boeing, Airbus and the Hardship of Dealing with PLM Obsolescence
Former French president Charles de Gaulle once famously complained about the difficulty of governing a country that had 246 different kinds of cheese. In the time since that statement was made, life for both societies and enterprises has become even more complicated, and the hardship of ruling diversity, illustrated by this “cheese analogy,” has grown exponentially
IBM launches new Digital Twin and Platform capabilities for Watson Internet of Things
IBM, Aras Corporation and OSI Soft today are launching new IBM Digital Twin capabilities, to create multiple views of products by bringing together various ‘digital threads’ and data streams that can be tailored to the needs of a particular user.
Schaeffler Group Selects Aras for Engineering Cockpit for 20,000 Users
Digital transformation is one of the key issues at Schaeffler. The Engineering Cockpit application is one of the central tools to connect all disciplines and systems. The Engineering Cockpit is a web-based application allowing direct access to development data for a large number of development centers. It supports the company-wide configuration and change management in the initial phase.
Schaeffler Selects Aras Innovator for Engineering Cockpit
Schaeffler´s Engineering Cockpit provides up to 20,000 users with role-based access to information across multiple disciplines, interfaces, systems, and authoring tools to make better decisions. The collaboration with Schaeffler is the first result of the partnership between Aras and IBM that was announced in December last year.
IBM and Aras Reseller Agreement to Enable IoT Product Design, Enhance PLM Software Market
TEC’s principal analyst PJ Jakovljevic what this deal means for the future of product development and what product companies stand to gain in the era of digital transformation.
LORD Corporation Selects Aras PLM Platform to Standardize Product Development Processes, Manage Growth
LORD Corporation, a global manufacturer of adhesives, coating, sensing and motion technologies, selected Aras Innovator® to standardize product development processes at current sites, and to help the company efficiently support emerging businesses. When fully implemented, LORD anticipates more than 1,000 users will access Document Management, Configuration Management, Engineering Change Management, as well as Quality Systems (CAPA) applications as part of the Aras PLM platform.
LORD Corporation Selects Aras PLM Platform to Standardize Product Development Processes, Manage Growth
LORD Corporation is transforming their business of engineering due to the flexibility, scalability, and common architecture offered by Aras PLM. The company is better positioned to easily and quickly integrate new acquisitions, while standardizing current engineering and product development sites onto one common platform.
LORD Selects Aras PLM Platform
LORD, a leading global manufacturer of adhesives, coating, sensing and motion technologies, selected Aras Innovator due to a scalable, robust and flexible PLM capabilities to accommodate changing business and market condition, as well as future acquisitions anticipated by the manufacturer, a model-based, service-oriented architecture that delivers low total cost of ownership without reducing the long term vision of the project and more.
SofTech Group Connector 7.0 Available
The SofTech Group Connector 7.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Group Connector 7.0 has been validated with Aras Innovator 11.0 SP7-SP8; along with Autodesk AutoCAD and AutoCAD Mechanical (2015, 2016, 2017); Autodesk Inventor (2015, 2016, 2017); and SolidWorks (2015, 2016, 2017). For additional information on the SofTech Group Connectors including datasheets and videos, please visit: http://www.softechgroupinc.com/products/softech-group-connectors
Fujifilm wählt Aras als PLM-Plattform für Produktrealisierungsprozess
Aras Innovator unterstützt zukünftig das Qualitätsmanagement des führenden Anbieters für medizinische Ausstattung
Huntington Ingalls Industries: Aras Innovator ist PLM-System der Wahl bei komplexer Konstruktion von Kriegsschiffen
Führende militärische Werft setzt auf flexible, skalierbare, anpassungsfähige Product-Lifecycle-Management-Plattform
Partnerschaft von Zuken und Aras ermöglicht nahtlose Produktanbindung
Unternehmen profitieren von einem ganzheitlichen Ansatz für bereichsübergreifende Zusammenarbeit
Aras, Airbus and IBM to Showcase ALM-PLM Open Reference Architecture at CRYSTAL Event
Initiative Supports a Systems Engineering Approach by Enabling Interoperability Across Different Life-cycle Domains – Mechanical, Electronics and Software
Engineering.com Webinar Shares Best Practices for Cloud Deployment of Product Lifecycle Management
June 15, 2016 Webinar Offers Real World Scenarios, Cloud PLM Strategies for Today’s Global Enterprise
Aras to Exhibit at Design Engineering & Manufacturing Solutions Conference and Expo in Tokyo
June 22 – 24, 2016 Event is Region’s Largest Manufacturing Technology Industry Conference
Aras, Carlisle Brake & Friction to Present at Digital Transformations Conference in Detroit
Presentation Part of Society of Manufacturing Engineers’ Smart Manufacturing Series on May 24, 2016
National Electric Vehicle Sweden AB Selects Aras as Global PLM Backbone and Minerva as Implementation Partner
Global OEM implements flexible, scalable PLM platform to support global processes all the way from development through manufacture to service
Airbus, MERSEN, Microsoft and Others to Present at Aras ACE 2016 France in Paris
Conference on June 2 is Part of Global Event Series Highlighting Innovations in Global Product Development
Toshiba Machine Selects Aras Innovator to Improve Design Processes, Enhance Product Quality, and Manage Global Product Information
Leading machine manufacturer selected Aras for its customization capabilities, web-based global accessibility, and lower total cost of ownership
Parata Systems Selects Aras as PLM Backbone to Streamline Product Design, Development and Service
Leading Pharmacy Automation Equipment Manufacturer Chooses Aras to Optimize Business Processes and Improve Visibility
Aras CEO & Founder Peter Schroer Receives Leadership Award from CAD Society
Award Recognizes Outstanding Technical and Business Leadership in the Industry and Focus and Dedication to the Needs of End Users
Aras to Present on MBSE at Zuken Innovation World 2016
Presentation entitled “Beyond ECAD Connectors” Addresses the Model-Based Systems Engineering Challenges Faced in IoT Design Processes
Aras Corporation to Present at 2016 Continuous Engineering Symposium, Dearborn, Michigan
April 19, 2016 event gathers industry, technology leaders to address today’s product development challenges.
Doosan Heavy Industries and Construction Selects Aras to Manage Global Product Information
Global industrial manufacturer selected Aras for the solution’s flexibility, open architecture and web-based global accessibility
Airbus, BAE Systems, Microsoft and more to Present at Aras ACE 2016 Conference
Global Leaders Discuss PLM Strategy at ACE 2016 Conference March 15 – 17 in Detroit, MI
Saab AB selects Aras PLM and Minerva as Implementation Partner
Military Defense and Civil Security Leader to Support Handling of Product Data Related to Gripen Fighter Aircraft
Aras and Elysium Announce Connector Solution for CATIA 3DEXPERIENCE to Aras Innovator
New Connector Enables Global Companies to Leverage CATIA Design Data across the Lifecycle and the Extended Enterprise
CGI Business Consulting and Aras Announce Partnership
Advanced PLM Technology Enables New Approaches to Business Transformation of Systems Engineering, Manufacturing and Compliance Processes
Engineering.com Webinar Features Airbus / IBM / Aras Sharing New Approaches to ALM/PLM Cross-Discipline Product Development
Learn Better Ways to Coordinate Systems Engineering and Development Across Mechanical, Electronics, Software and Firmware
Aras ACE 2016 Global Conference Coming to Detroit
Industry Leaders Converge to Share Best Practices and Learn New Approaches for the Business of Engineering
SofTech Connector 6.0 Available
The SofTech Connector 6.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Connector 6.0 has been validated with Aras Innovator 10.0 SP4-SP5 and Aras Innovator 11.0 SP0-SP5; along with Autodesk AutoCAD (2013, 2014, 2015, 2016); Autodesk Inventor (2013, 2014, 2015, 2016); CADRA 20; and SolidWorks (2013, 2014, 2015, 2016). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
KISTERS North America Hires Sales Executive for its Enterprise Content Management Solutions
KISTERS North America, Inc. announced that it has hired James Eardly to manage North American sales and support for its 3DViewStation viewing tool which makes design data visually available for the whole enterprise. Kisters 3DViewStation is Aras Digital Mockup solution.
SofTech Connector 5.1 Available
The SofTech Connector 5.1 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Connector 5.1 has been validated with Aras Innovator 10.0 SP4 and Aras Innovator 11.0 SP0; along with Autodesk AutoCAD (2013, 2014, 2015); Autodesk Inventor (2013, 2014, 2015); CADRA 20; and SolidWorks (2013, 2014, 2015). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
NorthRidge Announces Support for Aras Innovator 11
NorthRidge Software, LLC has validated support for Aras Innovator 11 on the current Discover Innovator 3.6 release. This extends support for the most intuitive and powerful search solution for Innovator users to Aras 9.3, 9.4, 10 and 11.
SofTech Connector 5.0 for Aras Available
The SofTech Connector 5.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. SofTech Connector 5.0 has been validated with Aras Innovator 10.0 SP0-SP4, and 9.4 SP0-SP2; along with Autodesk AutoCAD (2013, 2014, 2015); Autodesk Inventor (2013, 2014, 2015); CADRA 20; and SolidWorks (2013, 2014, 2015). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
KISTERS 3DViewStation V2014.2
There have been several enhancements in the area of file formats: support for Catia V5-6 2014 (R24), Creo 3, Inventor 2015 and SolidEdge ST7 has been added. Besides Catia drawings 3DViewStation now support reading of 2D PDF as the general 2D reading strategy. For the special case of PDF 3DViewStation now loads PDF in 2D mode first and after clicking on it will load the 3D object in a separate window for further analysis. 3DViewStation does not only support reading of PMIs and PMI views, but also allows to export PMIs and translates markups and dimensions into PMIs during export. For customer who prefer to use Adobe Reader in some processes, 3DViewStation now offers a new template incl. views carousel and editable form fields, which might get populated via an associated XML during runtime, even in an integrated environment. With PDF the part list item to geometry and PMI to feature associativity will be retained.
New Version Connector 4.5 for Aras Available
SofTech’s Connector 4.5 provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 4.5 has been validated with Aras Innovator 10.0 SP0-SP3, 9.4 SP0-SP2, 9.3 SP8 and SP9; along with Autodesk AutoCAD (2012, 2013, 2014); Autodesk Inventor (2011, 2012, 2013, 2014); CADRA 20; and SolidWorks (2010, 2011, 2012, 2013, 2014). For additional information on SofTech’s Connectors including datasheets and videos, please visit: http://www.softech.com/products/connectors-for-aras
KISTERS 3DViewStation V2014.1
After many customer requests Catia 2D drawing support has been added to KISTERS 3DViewStation. This is the beginning of adding more 2D file formats – 2D-PDF will be the next. Drawings as well as 3D parts or assemblies can be printed now, even on large format printing devices, including grid, markups and stamps to i.e. add printing time or document name, if desired. Also frequently asked for has been the undo-function, now allowing to undo selections, color changes, movements, dimensions and more.
New Version CAD Connector 4.4 for Aras Available
SofTech’s Connector 4.4 provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 4.4 has been validated with Aras Innovator 10.0 SP0 and SP1, 9.4 SP0 and SP1, 9.3 SP8 and SP9; along with Autodesk AutoCAD (2012, 2013, 2014); Autodesk Inventor (2011, 2012, 2013, 2014); CADRA 20; and SolidWorks (2010, 2011, 2012, 2013, 2014). For additional information on SofTech’s Connectors including datasheets and videos, please visit: http://www.softech.com/products/connectors-for-aras
株式会社ADSが、医療機器メーカー向けArasソリューション『Medical Device PLM』の提供開始
株式会社ADSは、医療機器メーカー向けソリューション『Medical Device PLM』 の提供を開始しました。 本ソリューションは、米国FDAの規制などのレギュレーション対応としてデンマー クのMinerva社が開発したAras Innovator向けソリューションです。 Minerva社 Medical Device PLM の特徴 - 成果物一覧からのDMR、DHRの作成 - ルールベースの成果物管理 - ダイナミックなDMR,DHF管理 - ベースラインの自動生成 ADSでは、今後、本ソリューションの日本語化対応、Aras Innovator CAPAソリューションとの連携を図ることで、日本の医療機器メーカーに求められる品質管理/規制対応要件をトータルでサポート致します。 ご興味のあるお客様は、info@adstr.co.jpまでお問合せください。 また、第25回設計製造ソリューション展にもArasブースにて出展致しますので、ぜひ、ご来場ください。
User interface customization and BREP export: KISTERS 3DViewStation V2014
3DViewStation V2014 ships with a fresh Office 2013 compliant user interface and provides functionality, which can be leveraged by the user quite intuitively. The focus of the latest developments has been set to customization of the user interface and BREP export capabilities.
The KISTERS 3DViewStation now provides several additional ways of UI customization: a pure left mouse button mode has been added to simplify the usage for occasional and also tablet-PC (finger) users. Mouse users now can determine, which functions should be performed when pressing the middle or right mouse button. The quick access toolbar can be customized and is pre-set now, so that frequently used functions are available without accessing the ribbon menu. Also, accelerator keys are defined for several functions and can be customized as per the user’s needs. Finally via XML the complete UI of the KISTERS 3DViewStation can be redefined.
3D CAD viewer for mobile users
KISTERS has announced the support for mobile users with the need for powerful 3D CAD viewers. The KISTERS 3DViewStation product family is available on many mobile devices and is known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data.
KISTERS 3DViewStation V12.03
Kisters presented the upcoming integration into Aras Innovator during ACE Europe last month. Today KISTERS has announced the release 12.03 of the 3DViewStation, known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data. We presented the upcoming integration into Aras Innovator during ACE Europe last month. The focus of the latest developments has been set to analysis functionality.
NTT DATA, a Global IT service provider, joins Aras partner program
Based on Aras Innovator, NTT DATA provides services and solutions for the Aras Community. As an end-to-end IT service provider NTT DATA offers high-end strategy and process consulting, implementation and maintenance for its customers. Focused on the Automotive, Aerospace and Manufacturing Industries, NTT DATA is an extremely experienced partner in data management and migration, project management, product development and collaborative engineering. Our experts have already proven their skills and delivered excellent services in customer-projects. You can get in contact with us personally at ACE Europe 2013 in Bad Soden. We are looking forward to a successful partnership with Aras Corp.
NTT DATA is introducing a new Aras solution
NTT DATA, a Global IT service provider and new Aras partner, is proud to present a new Aras solution at Ace Europe 2013 in Bad Soden.
We have created an easy, extensible, efficient and GEnIUS solution to change the way you work with Aras Innovator. Our solution is the implementation of global customer requirements into a next generation integration platform based on ARAS Innovator project experiences. NTT DATA’s GEnIUS is enabling integration across multiple authoring tools using one common user interface. For example, create your BOMs in MS Excel and save them to Aras Innovator, directly. Add or delete any parts or amounts in Excel and GEnIUS will do the rest on the Aras side – just do it. But Excel is only one of many supported tools. Stay informed, other tools will be named here soon and get in touch with GEnIUS personally at ACE Europe 2013 in Bad Soden.
1-Step assembly compare + sectioning + measurement: KISTERS 3DViewStation V12.02
KISTERS has announced the release 12.02 of the 3DViewStation. The KISTERS 3DViewStation is known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data. The focus of the latest developments has been set to management assembly comparison and analysis functionality.
Please review our BLOG-entries too: http://blog.kisters.de/?p=370 and http://blog.kisters.de/?p=376
3D-CAD-Viewer gets Bi-Turbo: KISTERS 3DViewStation V12.0
KISTERS 3DViewStation V12.0 ships with a fresh Office 2010 compliant user interface and provides a rich functionality, which can be leveraged by the user quite intuitively. The focus of the latest developments has been set to the graphics kernel. 3DViewStation load times are now unparalleled: in the meantime, we were almost unable to find assemblies, which load longer than 1 second, once translated into the internal 3DVS file format.
株式会社ADSは、米国SofTech社のテクニカル・パートナーになりました
株式会社ADSは、米国SofTech社と、Aras関連ビジネスにおける日本で最初のテクニカル・パートナーとなりました。
SofTech社は、オープンソースPLMシステム Aras Innovatorの米国パートナーとして、Aras Innovator向けCAD Connectorを開発しています。
- SolidWorks Connector for Aras
- Inventor Connector for Aras
- CADRA Connector for Aras
これらのCADコネクターについて、ご興味のあるお客様は、ADSまでお問い合わせください。
CycleOp is improving on the already great Express ECO's impact matrix
The improved express ECO features support for faster and full/partial loading of trees, support for check boxes and list boxes, support for substitutes and multiple row changes, and much, much more.
New Version Connector 3.0 for Aras Available
Connector 3.0 for Aras from SofTech provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 3.0 currently supports Aras Innovator 9.3 along with CADRA 20, Autodesk Inventor (2011, 2012, 2013), and SolidWorks (2010, 2011, 2012, 2013).
For additional information on Connector 3.0 including datasheets, videos and upcoming webinars, please visit: http://www.softech.com/products/connectors-for-aras
New Version 3.3 of CATIA V5 CAD Connector (PDM Workbench) available
PDM Workbench (PWB) from T-Systems is an extension of CATIA V5 which provides integration of CAD-specific PDM functionality. PWB, designed as a CATIA V5 workbench, is dedicated to displaying and manipulating PDM data. It combines the control of PDM with the CAD superiority of CATIA V5 in a single user interface. PWB currently supports Aras Innovator 9.3. It enables the designer to take full advantage of PDM capabilities supporting collaborative product development, all within the CATIA V5 environment the designer is familiar with. New functionalities in version 3.3 are: - Basic Drawing Link support - Basic Multi Model Link support - Management of CATIA Templates in Aras Innovator - Enhanced PWB Update dialog: - PDM data management - Highlight of Geometries and PDM info - Aras Innovator Multi-Vault Support - Admin Mode for CATSettings - Replace from PDM - Insert from PDM - Auto name support using Innovator sequence items Additional materials for Download and videos on our website.
Minerva launches new Productivity Tool for Aras Innovator
The PDX standards define an XML encoding scheme that enables supply chain partners to exchange product content, changes and subsequent manufacturing information in a common language. This capability allows companies to exchange information through a single port of the exchange software rather than developing a different solution for each trading partner.
Download brochure and request a web demo on our website.
New Version 3.2 of CATIA V5 CAD Connector (PDM Workbench) available
PDM-Workbench (PWB) from T-Systems is an extension of CATIA V5 which provides integration of CAD-specific PDM functionality. PWB, designed as a CATIA V5 workbench, is dedicated to displaying and manipulating PDM data. It combines the control of PDM with the CAD superiority of CATIA V5 in a single user interface. PWB currently supports Aras Innovator 9.3. It enables the designer to take full advantage of PDM capabilities supporting collaborative product development, all within the CATIA V5 environment the designer is familiar with.
The vdR Group Announce their Partnership with Alcove9, Developers of Advanced Search Technologies
The vdR Group, business system integration specialists, and Alcove9, developers of open source advanced search technologies such as the a9 Hub, announce their partnership. The partnership improves the productivity of clients' critical business systems by combining the power of custom interoperability with advanced search capabilities. read more
DataSquare becomes PLM HOUSE
Since 1st of January 2012, DataSquare has merged with its sister company MEAIS GmbH & Co. KG to become DataSquare GmbH. With this step, we can bundle the competencies of both former companies under the roof of our newly created PLM HOUSE, in order to offer our clients even more comprehensive consulting for successful Product Lifecycle Management. Visit the new DataSquare website for further information.
Estrix of Spain to be Non Exclusive VAR for Plural's Apparel Innovator
Plural Technology, the only open source PLM provider for Apparel Industry, announced today the recent signing of an agreement with Estrix Spain, a software reseller and consulting company. Plural’s Flagship product Apparel Innovator is the only open source PLM tool available in the market. Apparel Innovator has various modules like Product development, Sourcing, Project Management, BI Reporting available out of the box. Estrix holds a prominent place in Spain’s Apparel Market as Business Management consulting company. For more information please visit www.pluraltechnology.com
Minerva launching new tool for Aras Innovator
A company implementing PLM faces many challenges. One of the typical challenges is to get data from sources like CAD into the PLM system. Having an automatic integration between the PLM system and CAD is an option, but it is often costly, and for many companies the number of CAD users is too low to justify the investment.
DataSquare is CMII Europe Solution Partner
As the official source of CMII standards in Europe, the German Gesellschaft fuer KonfigurationsManagement mbH (GfKM) maintains the list of certified CMII providers. Due to the commitment to CMII, DataSquare has been awarded the title "Europe Solution Partner", being the fourth consulting firm to gain it. CMII Europe Solution Partner are consulting firms which employ consultants with the status "CMII Professional" and offer support for companies implementing CMII. This includes training, consulting and coaching as well as the execution of assessments.
Improve the Collaboration in the Extended Supply Chain by the Minerva Permissions Manager
To simplify the process of managing permissions for external partners in Aras Innovator®, Minerva has developed a new add-on solution. The Minerva Permissions Manager makes it possible and easy to give an external party access to certain parts, products or files in the Aras platform.
Minerva appoints new Product Manager
Minerva has appointed Thomas Skogen as Product Manager to strengthen the development and support of the growing number of Aras add-on solutions from Minerva.
Minerva launches Microsoft Office Connector for Aras
Minerva's Microsoft Office Connector for Aras provides an easy-to-use interface with advanced functionality allowing documents, spreadsheets and presentations to be managed by a robust PLM system. The focus at Minerva is to "Keep it simple". Simple commands like Open, Lock, Save and Unlock allow you to quickly come up to speed. Learn more and download a free 30 day trail of the Microsoft Office Connector for Aras today.
New CATIA V5 PDM-Workbench Connector for Aras Innovator by DataSquare & T-Systems
The PDM-Workbench from T-Systems is an extension of CATIA V5 from Dassault Systèmes. With the connector developed by DataSquare, the PDM-Workbench is integrated to Aras Innovator and serves as a CATIA V5 interface. The Aras Innovator PDM-Workbench Connector functions as a connection between the product structure of the PDM-Workbench and the Aras Innovator data model enabling bi-directional data exchange between CATIA V5 and the Aras PLM platform.
Updated release of the Aras Innovator E-mail Connector available
Now the Aras Innovator E-mail Connector from DataSquare is also available in an advanced, chargeable version. The release includes a new e-mail management assistant that makes mass processing and distribution of permissions possible. So, even very large quantities of e-mails are assigned quickly and easily to persons and items.
DataSquare Supports Reduced Rework Initiative for Company-Stabilization
The R2 „Reduced Rework“ Initiative seeks ways to avoid costs by reducing rework and corrective actions within the enterprise. It integrates all activities and strategies on reducing rework offered by "R2 Specialists" and used by "R2 Initiative Members" world-wide. DataSquare supports this initiative as R2 Specialist with consulting and software knowledge. DataSquare’s expertise in the areas of PLM and CMII supports the steps that are necessary to reduce rework significantly. At the same time DataSquare is able to build up an improved business process infrastructure using existing or new PLM software.
DataSquare Presents Aras Innovator OCR Connector
Aras Innovator OCR Connector enables the automated recognition of text inside typewritten documents that are stored as picture files within Aras Innovator. Based on rules, text is being taken over as property, so that documents can be filed and found automatically. With this capability, Aras Innovator OCR Connector creates the requirement to integrate documents from existing “paper workflows” into PLM processes, easy and fast.
CycleOp launches Hebrew Language PLM Blog
בלוג יולי – הגרסא החדשה של
Aras Innovator
בתחילת החודש (יולי 2011) שוחררה הגרסא החדשה של
גרסא Aras Innovator – 9.3.0
אישית – חיכיתי בכיליון עיניים לגרסא החדשה כיוון שהיא כוללת בתוכה אוסף עצום של יכולות חדשות וחזקות במיוחד.
Shapespace Technology Delivers Advanced 3D Search for Aras
The ShapeSpace 3D Search tool for Aras extends the searching capabilities of Aras to enable searching by shape. For the first time, this puts advanced and affordable 3D search capabilities into the hands of organizations giving them the opportunity to improve part re-use, reduce the part number counts, aggregate and consolidate bought in parts, and drastically reduce external spend.
Do Your Detective Work in 3D
Imagine an organisation with thousands of products broken down into tens of thousands of parts. Now consider their drawings repository, all tagged with non-uniform descriptions and part numbers, often shared across several departments and offices. What a nightmare! How do they find a specific part in a hurry? Hope the description was entered intuitively? Rely on the accuracy of the part number? What about duplicates – aren’t they costly and confusing? ShapeSpace solves the problem. Shape-Space is a unique 3D search engine which enables you to re-organise, re-catalogue and eradicate duplicates in your massive drawings archive in hours.
Open Source
I ett telefonsamtal i veckan med Leon Lauritsen på Minerva i Danmark talar vi om att man i varje samtal där begreppet "open source" förekommer, först behöver enas om vad det betyder. Leon är representant för Aras Innovator (PLM) som använder uttrycket Enterprise Open Source om sin produkt. Han säger också att open source-budskapet ibland gör kunderna oroliga. Att köpa eller hyra ett program är liksom enkelt. Men när det handlar om open source så blir affärsmodellen betraktad från alla håll den också, inte bara själva produkten som kan komma att användas. Och det är klart att det inte är så dumt att syna sina affärspartners oavsett om det handlar om ett köp, hyra eller "open source-användning". Men inget säger egentligen att det skulle vara helt tryggt att köpa och hyra eller helt otryggt att ta hem en vara "open source"? Det handlar kanske mera om att vänja sig vid modellen. Det menar i alla fall de som jobbar med "open source".
Shape Searches Eliminate Duplication
Because design engineers often lack browse and search capabilities, the business of finding a part within a large component library can be complex and time consuming, especially when the name or part number is unknown. Naturally, this problem tends to make finding and reusing existing parts extremely difficult. A solution to this problem is available in the form of ShapeSpace, a 3D shape search technology provides engineering companies with a comprehensive 3D CAD search tool.
A Leaner Manufacturing Case Study
Control valve manufacturer Bifold wanted to drive changes in their manufacturing processes which would cut costs and deliver measurable improvements in reliability and performance. Using ShapeSpace 3D search technology to search their entire part reference library and identify all parts manufactured from the same raw material, Bifold were very quickly able to consolidate manufacturing processes and improve efficiencies. “As well as being leaner, greener and more efficient, we are able to turn around customer orders in a more reliable timeframe as the majority of parts are always ‘on the shelf’," said Mike Peacock, General Manager at Bifold.
Variantenmanagement: Neue Aras-Anwendung ermöglicht Gleichteilestrategie bei maximaler Variabilität
Moderne Produktplattformen führen zu mehr Qualität, geringeren Kosten und kürzerer Time-to-Market
PLM-Lösung von Aras ermöglicht JTEKT mehr Flexibilität und Kalkulationssicherheit bei der Auftragsfertigung
Spezialist für industrielle Wärmebehandlungsanlagen optimiert sein Datenmanagement
Schiffswartung: MacGregor erweitert mithilfe von Aras den Funktionsumfang seiner Monitoring-Lösung OnWatch Scout
Echtzeit-Analysen, noch mehr Benutzerfreundlichkeit und eine erweiterte Datenkontrolle
Aras von unabhängigem Marktforschungsunternehmen als führend im Product Lifecycle Management ausgezeichnet
Bestmögliche Bewertung in den Bereichen Compliance, Nachhaltigkeit, Green PLM Support, Digital Thread, Extended BOM, Software Bill und Varianten
Energiepreisspirale: Europas Industrie verschenkt enormes Einsparpotenzial
Die Hälfte des Verbrauchs kann noch eingespart werden
Europaweite Studie: Industrie stellt sich auf lang anhaltende Multikrise ein
90 Prozent der Unternehmen rechnen auch über 2023 hinaus mit großer Instabilität
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Abschied von klassischer Produktfokussierung setzt Industrie unter Druck / Denken in Systemen bedingt stärkere interne und externe Vernetzung
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
ESG in der Industrie: Mit einem durchgängigen Datenmanagement die Nachhaltigkeitsziele erreichen
Industrial Digital Twin: AVEVA and Aras schließen strategische Partnerschaft
Gemeinsame Entwicklung von Lösungen für ein skalierbares Asset Lifecycle Management
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Laut der Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“ sind sich Deutschlands Unternehmen ihrer „Datenschätze“ zwar bewusst, schaffen es aber nicht, diese auch zu heben. Die Gründe reichen von fehlender Transparenz über Probleme bei der Konsolidierung bis hin zur immer noch vorhandenen Excel-Dominanz. Für die Studie hat die Produkt-Innovations-Plattform Aras mehr als 130 Top-Führungskräfte deutscher Unternehmen mit einem Umsatz von mindesten 100 Mio. Euro befragt.
Von der Produktidee bis zur Zulassung – Aras-Plattform macht Medizintechnikunternehmen Ottobock innovativer und schneller
Product Lifecycle Management sorgt für effizienten, digitalen F&E-Workflow
Aras investiert in den Integrationsspezialisten XPLM, um Innovationen zu beschleunigen und weiterhin eine offene Connectivity -Lösung für Entwicklung und Produktion zu garantieren
Damit steht dem globalen Markt auch künftig ein starker, unabhängiger Anbieter für Connectivity-Technologien der nächsten Generation zur Verfügung.
Datenintegrität durch Automatisierung: IWT entscheidet sich für PLM-Lösung von Aras
Das Life-Science-Unternehmen organisiert über die Aras-Plattform kundenspezifische Anpassungen in der Produktion
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Ökologisches Produktdesign wird zum zentralen Hebel zur Erreichung der Nachhaltigkeitsziele / Der Einsatz recycelter Materialien legt weiter zu
Studie „Challenges 2022“
Erst jedes dritte Unternehmen ist gut auf das neue Lieferkettengesetz vorbereitet
Studie „Challenges 2022“
In zwei von drei Unternehmen sind die Prozesse mit dem aktuellen Veränderungstempo überfordert / Veränderungsbedarf und Veränderungsfähigkeit gehen immer weiter auseinanderg
Aras übernimmt Minerva Group
Synergie & Funktionalität auf höchstem Niveau für die Branchen Medizintechnik und High-Tech-Elektronik
Spitzenposition ausgebaut: Aras verkürzt die Release-Frequenz für seine PLM-Softwareplattform
Neue Version „Aras Innovator 14“ beschleunigt Innovationen und Time-to-Value
Kendrion setzt auf Aras Enterprise SaaS als digitalen Backbone
Cloud-basierte Aras DevOps-Prozesse schaffen neue Möglichkeiten für kontinuierliches Wachstum
Aras ernennt Roque Martin als neuen Chief Executive Officer
Mit Roque Martin kommt ein erfahrener Branchenexperte zu Aras; Peter Schroer wird Mitglied im Board of Directors
Aras begrüßt den ehemaligen Ansys Chairman und CEO James Cashman im Board of Directors
Cashmans Führungserfahrung im Ausbau von Unternehmen unterstützt die rapide Expansion von Aras
Aras sichert sich umfangreiche Wachstumsinvestition von GI Partners
Kapitalanlage stärkt die weitere Innovation der Low-Code-Plattform von Aras, die globale Expansion und den Kundenerfolg
Aras erweitert sein Subscription-Angebot um Enterprise SaaS
Zusammen bieten Enterprise SaaS und DevOps für globale Unternehmen eine leistungsfähige Cloud-first-Plattform mit unbegrenzter Anpassungsfähigkeit
Aras Simulation Management bietet Anwendern höhere Skalierbarkeit, Flexibilität und offene Konnektivität
Applikation ermöglicht Systemexploration und -verifikation über den gesamten Lebenszyklus
Aras Systems Architecture verbindet MBSE mit Digital Thread über den gesamten Lebenszyklus
Neue Anwendung führt Systemmodelle aus verschiedenen Tools zu einer Gesamtsystemarchitektur zusammen
Keynotes von Toyota Motor Europe, Cubic Corporation, US Department of Defense, Insitu und CIMdata
Aras Digital ACE 2021: Best Practices für die unternehmensweite digitale Transformation
Haulotte schafft mit Aras einen echten Enterprise Digital Thread
Plattform für die unternehmensweite digitale Transformation sichert nachhaltige Geschäftserfolge
DENSO Corporation modernisiert mit Aras seine Infrastruktur
Globaler Mobilitätsanbieter setzt auf die Aras-Plattform, um die Datentransparenz im gesamten Unternehmen zu optimieren
Ottobock modernisiert mit Aras seine Forschung und Entwicklung
Ottobock wählt die Aras-Plattform, um Produktinnovation und Wachstum zu beschleunigen
Grammer AG entscheidet sich für die Aras Innovator-Plattform
Zukunftssichere Geschäftsabläufe und digitale Transformation
Neue frei verfügbare Version von Aras Innovator für eine beschleunigte digitale Transformation
Zahlreiche Updates für eine einheitliche und leistungsfähige Organisation der PLM-Abläufe und für das Arbeiten in Remote Teams
Marc de Guiran ist neuer Chief Revenue Officer bei Aras
Marc ist eine internationale Führungskraft mit nachweislicher Erfahrung im Wachstum globaler Vertriebsgeschäfte
Aras kündigt neue Low-Code-Anwendung für Digital Twins an
Mit dem Digital Twin Core lassen sich digitale Simulationen von Produkten und Systemen in einer Vielzahl von Branchen erstellen und verwalten
EIZO entscheidet sich für Aras
Der Anbieter von visueller Technologie wählt Aras aus, um Produktivität und Qualität durch digitale Fertigung zu steigern
Strategische Partnerschaft: Aras lizenziert Plattform an ANSYS
Zusammenarbeit ermöglicht bessere Prozess- und Datenverwaltung für Simulationen. Digital Thread lässt sich über gesamten Lebenszyklus hinweg zurückverfolgen
Aras erweitert Low-Code-Plattform und vereinfacht Zusammenarbeit mit Lieferanten
Umfangreiche Updates steigern Produktivität der Mitarbeiter
Schnelle Expansion: Aras erhält 70 Millionen US-Dollar von Goldman Sachs
Silver Lake Kraftwerk an neuer Investment-Runde beteiligt; Goldman Sachs tritt Aufsichtsrat von Aras bei
Steigende Nachfrage nach Simulationen: Aras präsentiert Grundsätze
Offener, plattformbasierter Ansatz ermöglicht es, den vollen Nutzen aus Simulationen zu erschließen. Er verbindet den Digital Thread und ermöglicht den Digital Twin
Dräger setzt auf Aras PLM Plattform
Cloud-basierte PLM-Strategie bietet Grundlage für Drägers Wachstum
Neues Servicepaket von Aras steigert Effektivität in Fertigungsbetrieben
Mit Aras benutzerdefinierte Kriterien festlegen, Instanzen in einer dynamischen Datenstruktur verwalten und Entwicklungsprozesse verknüpfen
Flexibles System: Bayrischer Automobilhersteller entscheidet sich für Aras
Neuer Kunde aus dem Automotive-Umfeld implementiert PLM-Applikation Aras Innovator
Aras PLM vereinfacht Varianten-Management in der Produktion
Neue Funktionen steigern die Produktivität, verbessern die Zusammenarbeit und die Teameffizienz
Aras von führendem Analystenhaus als „Leader“ im Product Lifecycle Management für produzierende Unternehmen eingestuft
Bestnoten in den Kategorien „Product Vision“, „Implementierung und Sustainability“, „Konfigurierbarkeit und Flexibilität“ sowie „Bill-of-Materials-Management“
Huntington Ingalls, Microsoft und IBM präsentieren auf Kundenkonferenz ACE 2017 von Aras
Vertreter der Produktentwicklung, IT und Fertigung diskutieren über IoT, Digital Thread und die digitale Transformation in den USA
Schaeffler Gruppe setzt auf Aras als Plattform für Engineering Cockpit mit 20.000 Usern
Führender Automobil- und Industriezulieferer schafft Voraussetzungen für IoT mit Aras als PLM Backbone
Fujifilm wählt Aras als PLM-Plattform für Produktrealisierungsprozess
Aras Innovator unterstützt zukünftig das Qualitätsmanagement des führenden Anbieters für medizinische Ausstattung
Huntington Ingalls Industries: Aras Innovator ist PLM-System der Wahl bei komplexer Konstruktion von Kriegsschiffen
Führende militärische Werft setzt auf flexible, skalierbare, anpassungsfähige Product-Lifecycle-Management-Plattform
Partnerschaft von Zuken und Aras ermöglicht nahtlose Produktanbindung
Unternehmen profitieren von einem ganzheitlichen Ansatz für bereichsübergreifende Zusammenarbeit
Aras, Airbus and IBM to Showcase ALM-PLM Open Reference Architecture at CRYSTAL Event
Initiative Supports a Systems Engineering Approach by Enabling Interoperability Across Different Life-cycle Domains – Mechanical, Electronics and Software
Engineering.com Webinar Shares Best Practices for Cloud Deployment of Product Lifecycle Management
June 15, 2016 Webinar Offers Real World Scenarios, Cloud PLM Strategies for Today’s Global Enterprise
Aras to Exhibit at Design Engineering & Manufacturing Solutions Conference and Expo in Tokyo
June 22 – 24, 2016 Event is Region’s Largest Manufacturing Technology Industry Conference
Aras, Carlisle Brake & Friction to Present at Digital Transformations Conference in Detroit
Presentation Part of Society of Manufacturing Engineers’ Smart Manufacturing Series on May 24, 2016
National Electric Vehicle Sweden AB Selects Aras as Global PLM Backbone and Minerva as Implementation Partner
Global OEM implements flexible, scalable PLM platform to support global processes all the way from development through manufacture to service
Airbus, MERSEN, Microsoft and Others to Present at Aras ACE 2016 France in Paris
Conference on June 2 is Part of Global Event Series Highlighting Innovations in Global Product Development
Toshiba Machine Selects Aras Innovator to Improve Design Processes, Enhance Product Quality, and Manage Global Product Information
Leading machine manufacturer selected Aras for its customization capabilities, web-based global accessibility, and lower total cost of ownership
Parata Systems Selects Aras as PLM Backbone to Streamline Product Design, Development and Service
Leading Pharmacy Automation Equipment Manufacturer Chooses Aras to Optimize Business Processes and Improve Visibility
Aras CEO & Founder Peter Schroer Receives Leadership Award from CAD Society
Award Recognizes Outstanding Technical and Business Leadership in the Industry and Focus and Dedication to the Needs of End Users
Aras to Present on MBSE at Zuken Innovation World 2016
Presentation entitled “Beyond ECAD Connectors” Addresses the Model-Based Systems Engineering Challenges Faced in IoT Design Processes
Aras Corporation to Present at 2016 Continuous Engineering Symposium, Dearborn, Michigan
April 19, 2016 event gathers industry, technology leaders to address today’s product development challenges.
Doosan Heavy Industries and Construction Selects Aras to Manage Global Product Information
Global industrial manufacturer selected Aras for the solution’s flexibility, open architecture and web-based global accessibility
Airbus, BAE Systems, Microsoft and more to Present at Aras ACE 2016 Conference
Global Leaders Discuss PLM Strategy at ACE 2016 Conference March 15 – 17 in Detroit, MI
Saab AB selects Aras PLM and Minerva as Implementation Partner
Military Defense and Civil Security Leader to Support Handling of Product Data Related to Gripen Fighter Aircraft
Aras and Elysium Announce Connector Solution for CATIA 3DEXPERIENCE to Aras Innovator
New Connector Enables Global Companies to Leverage CATIA Design Data across the Lifecycle and the Extended Enterprise
CGI Business Consulting and Aras Announce Partnership
Advanced PLM Technology Enables New Approaches to Business Transformation of Systems Engineering, Manufacturing and Compliance Processes
Engineering.com Webinar Features Airbus / IBM / Aras Sharing New Approaches to ALM/PLM Cross-Discipline Product Development
Learn Better Ways to Coordinate Systems Engineering and Development Across Mechanical, Electronics, Software and Firmware
Aras ACE 2016 Global Conference Coming to Detroit
Industry Leaders Converge to Share Best Practices and Learn New Approaches for the Business of Engineering
Mehr Wunsch als Wirklichkeit
In der Frage nach dem digitalen Reifegrad überschätzen sich viele europäische Industrieunternehmen. Die Automobilbranche hebt sich vom Durchschnitt allerdings ab.
Der digitale Faden führt durchs Krisen-Labyrinth
Der Weg aus dem Labyrinth: Energiekosten, Inflation und Fachkräftemangel bereiten den Unternehmen weiterhin Sorgen. In einem Gastbeitrag für das Magazin RiskNET erläutert Aras-Geschäftsführer Jens Rollenmüller, wie Unternehmen mithilfe eines digitalen Fadens durch die Krise kommen.
GREEN DATA
Mit den zunehmenden Anforderungen an Unternehmen, über Klimaschutz, Compliance und Co. zu berichten, steigt auch die Menge der zu verarbeitenden Daten. Die beliebte Excel-Liste stößt irgendwann an Grenzen. Wie ESG-Managementsoftware helfen kann, strukturiert zu berichten – und Prozesse nachhaltig zu verbessern.
Lückenlose Daten im Produktlebenszyklus
Produkt Lifecycle Management (PLM) ist eine wesentliche Voraussetzung für eine nachhaltige Kreislaufwirtschaft. Es hilft dabei, den Blick auf zusätzliche Qualitätsmerkmale in der Herstellung zu richten. Und nachhaltige Produkte haben besondere Qualität. Grammer zeigt, wie sich der Zusammenhang zwischen Nachhaltigkeit, Kreislaufwirtschaft und Qualitätsmanagement herstellen lässt.
Druckluft mieten statt Kompressoren kaufen
Bei Kompressor-Hersteller Tamturbo bilden produktbezogene Daten die Basis für den
Erfolg des Geschäftsmodells. Mit der PLM-Plattform von Aras stellen die Finnen sicher,
dass überall im Unternehmen Daten-Transparenz herrscht.
The Story Behind the Surprising Partnership Between AVEVA and Aras
Verdi Ogewell of Engineering.com shares his thoughts about Aras' strategic OEM licensing partnership with AVEVA, saying it is another recognition of the strength of the Aras Innovator platform and the joint venture with AVEVA is a feather in the cap for CEO, Roque Martin.
Komplexe Entwicklungsprojekte mit Systems Engineering bewältigen
In nahezu allen Branchen werden Produkte heute immer intelligenter und enthalten immer mehr Software. Dadurch werden sie komplexer, ebenso ihre Entwicklung. Systems Engineering ist eine Denkweise, die bei Design und Fertigung dieser Produkte die Komplexität beherrschbar macht. Sie wird hier anhand von Beispielen aus der Automobilindustrie vorgestellt.
Automation und digitaler Zwilling im Schiffsbau: Sicher unterwegs auf allen Weltmeeren
Bureau Veritas, eine der wichtigsten Schiffsklassifizierungsgesellschaften und Offshore-Sicherheits- und Prüfstellen, hat sich für die PLM-Plattform Aras Innovator entschieden. Damit entwickelt das Unternehmen seine Prozesse für die Klassifizierung von Schiffen und Offshore-Anlagen weiter.
Wie ein PLM die Kreislaufwirtschaft abbildet
Die Automobilindustrie verbaut zunehmend nachhaltige und wiederverwertbare Materialien. Das Ziel ist eine vollständige Kreislaufwirtschaft. Um die damit verbundene Datenfülle beherrschen zu können, setzt der Zulieferer Grammer auf Product Lifecycle Management.
Why Aras’ Roque Martin Bought Minerva, and the New Upcoming Ansys-Like Arrangements
Part two of Verdi Ogewell's conversation with Roque Martin and Peter Schroer explores the CEO transition, details about our recent Minerva merger, and the future of our platform.
Taking Aras PLM from a Thorn in the Side to a Real Threat
Aras’ founder, Peter Schroer, and CEO, Roque Martin, sat down with Verdi Ogewell of Engineering.com to discuss Aras’ growth among the other vendors in the market, what makes Aras and its platform stand out, and Roque’s mission as CEO.
Aras Invests in XPLM
CIMdata provides a brief overview of Aras’ investment in XPLM, saying that they are pleased to see that Aras is continuing to invest in openness that benefits the entire PLM economy including end user customers, ISV partners, and competitors alike.
Three steps to building a resilient enterprise ecosystem
Aras’ CRO, Rob McAveney, explains that if product data is used properly, it can deliver insights that allow businesses to pivot with agility when it needs to adapt to new requirements.
PLM-Trends 2022: Systeme, Kreisläufe und noch mehr Tempo
Das Product Lifecycle Management ist wichtig, um den Lebenszyklus eines Produkts zu dokumentieren. Im Zuge der Digitalisierung verschmelzen ehemals gezogene Grenzen zu ERP- und anderen zentralen Unternehmensanwendungen zunehmend. Auf welche Entwicklungen gilt es hier zu achten?
Aras peilt PLM-Marktführerschaft an
Für Aras brachte 2021 viele Neuigkeiten. Neue Investoren haben die Mehrheit der Anteile übernommen und das Vorstandsteam wurde neu aufgestellt. Könnte Aras in den kommenden Jahren zu einem neuen Schwergewicht in der PLM-Branche werden? Die wichtigsten Punkte in Kürze und ein Gespräch mit dem Vizepräsidenten für Europa, Stéphane Guignard.
Aras Announces Merger of Minerva Group (Highlight)
CIMdata provides a brief overview Aras’ merger of Minerva, saying this is a great addition for Aras, offering better support for out-of-the-box implementations within specific industries and helps increase Aras’ top line revenue.
Breaking News: Aras PLM Takes Over Its Main Partner Minerva
Verdi Ogewell of Engineering.com says Aras’ merger of Minerva will enable the company to position itself to better solve complex digitalization challenges in technology, manufacturing and the supply chain. At the same time, the added expertise in vehicle, aerospace, defense and industrial equipment manufacturing will benefit customers moving forward.
ERP-Migration Nutzen, um PLM zu stärken
Bei Abkündigung ihrer bestehenden lokalen ERP-Installation sind aktuell viele Unternehmen gezwungen, auf eine neue, mitunter Cloud-basierte Plattform zu migrieren. Der Wechsel bietet die Chance, das Zusammenspiel zwischen ERP und PLM neu zu definieren. Doch dazu benötigen sie eine flexible PLM-Plattform.
plastverarbeiter-20210825
Der strukturelle Aufbau für eine schnellere digitale Transformation ist für die kunststoff- und kautschukverarbeitenden Branchen essentiell. Die Antwort liefert ein robustes und zukunfstfähiges Product Lifecycle Management (PLM) in der Cloud.
Der Digital Thread benötigt echtes Model-Based-Engineering
Für den Digital Thread existiert eine besonders ehrgeizige Vision: Er soll eine maßgebliche und nachvollziehbare Rückverfolgbarkeit (Traceability) aller Konstruktionsbereiche – Anforderungen, Funktionen, Use Cases, Testfälle und weitere Artefakte – entlang des gesamten Produktlebenszyklus herstellen.
PLM: Standardsoftware ist nicht die Antwort
Viele Anbieter im Bereich PLM (Product Lifecycle Management) preisen ihre Lösung damit an, dass sie out-of-the-box als Standardsoftware funktioniert. Das soll in der Theorie die Zusammenarbeit zwischen Herstellern und ihren externen Stakeholdern wie OEMs oder Zulieferern vereinfachen. In der Praxis sieht es jedoch oft anders aus: Denn der Einsatz von Standardsoftware wird den individuellen Anforderungen, die jedes Unternehmen mit sich bringt, nicht gerecht. Stattdessen benötigen Unternehmen ein offenes sowie flexibles PLM-System, das Freiraum für Anpassungen bietet – so können sie den einzigartigen Produktlebenszyklus abbilden sowie rückverfolgen und die Zusammenarbeit über die gesamte Lieferkette hinweg verbessern.
Resilientes PLM – Digitalisierungsschub für die Unternehmenszukunft
Deutschland ist Datenland. Das geht aus einer aktuellen Studie von accenture hervor, in der ein Vergleich mit dem globalen Wettbewerb gezogen wird. Eine wichtige Erkenntnis ist, dass Unternehmen derzeit ihre Prozesse weltweit digitaler aufstellen. Dennoch gehen die Organisationen in Deutschland zögerlich im Vergleich zu anderen Ländern vor. Kern-Unternehmensprozesse werden nicht schnell genug digitalisiert, was sowohl die Skalierung als auch die Veränderung des Unternehmens behindert. Um sich angesichts des wachsenden Wettbewerbsdrucks durch digitale und internationale Player zukunftssicher aufzustellen, sollten produzierende Unternehmen Strukturen aufbauen, mit denen sie sich flexibel an den Markt anpassen und zeitgleich nachhaltige Geschäftserfolge erzielen können. Einen Schwerpunkt in der digitalen Transformation ihrer Organisation sollten sie daher auf ein zukunftsfähiges und robustes Product Lifecycle Management (PLM) legen.
PLM-System: Wie es die digitale Transformation unterstützt
Bislang ging es bei der digitalen Transformation hauptsächlich darum, Technologien der Industrie 4.0 nutzbar zu machen. Damit waren durchaus ehrgeizige Ziele verbunden. Leider erfüllten die Projekte die hohen Erwartungen oft nicht. Vor allem große Unternehmen kämpfen mit der Modernisierung ihrer über Jahre gewachsenen Technologie-Stacks und den Kosten für die Vereinfachung ihrer IT-Anwendungen und der IT-Infrastruktur. Wie sich das ändern lässt.
Resilient PLM - Produktlebenszyklus im PLM sicher abzubilden zahlt sich aus
Viele Unternehmen haben nicht rechtzeitig reagiert beim Umsetzen digitaler Trends – und wurden von den Ereignissen 2020 überrollt. Jetzt müssen sie Strukturen aufbauen, mit denen sie sich an geänderte Begebenheiten anpassen können. Der Schlüssel liegt in einem resilienten PLM.
Diese fünf Fallstricke lauern bei der digitalen Transformation
Innovationszyklen für Produkte und Dienstleistungen gewinnen stetig an Tempo, doch viele Hersteller können mit ihren veralteten, starren Product-Lifecycle-Management-Systemen nicht Schritt halten. Um die Vorteile der Industrie 4.0 voll auszuschöpfen, benötigen sie stattdessen eine flexible, resiliente Architektur.
Per Digital Twin zur erfolgreichen Predictive Maintenance
Der Digital Twin einer Anlage kann für die Instandhaltung eine Hilfe sein, mögliche Fehler im Kontext zu erkennen und effektiv zu arbeiten. Lesen Sie, wie.
Wie PLM die Digitale Transformation unterstützt
Bislang ging es bei der digitalen Transformation hauptsächlich darum, Technologien der Industrie 4.0 nutzbar zu machen. Damit waren durchaus ehrgeizige Ziele verbunden. Leider erfüllten die Projekte die hohen Erwartungen oft nicht. Vor allem große Unternehmen kämpfen mit der Modernisierung ihrer über Jahre gewachsenen Technologie-Stacks und den Kosten für die Vereinfachung ihrer IT-Anwendungen und der IT-Infrastruktur. Wie sich das ändern lässt.
PLM-Plattform: Produktentwicklung am Puls der Zeit
Immer kürzere Innovationszyklen und zunehmend komplexe Produkte bringen klassische PLM-Lösungen an ihre Grenzen. Wer Schritt halten will, benötigt eine digitale Plattform, die alle Abläufe flexibel und zukunftssicher unterstützt.
Digital Twin – die Zukunft in der Produktion
Digital Twins setzen sich zunehmend durch: Laut Gartner verwenden 75 Prozent der Organisationen, die IIoT (Industrial Internet of Things) implementieren, bereits den Digital Twin oder planen dies innerhalb eines Jahres zu tun. Das Konzept entwickelt sich so zu einem wichtigen Teil einer Predictive-Analytics-Strategie. Die meisten Organisationen sind jedoch noch nicht über das Pilotenstadium hinausgekommen und setzen es nicht in großem Maßstab ein. Warum aber ergreifen viele Unternehmen noch nicht die Möglichkeiten, die der Digital Twin ihnen bietet?
The Modern Face of SPDM
As simulation-driven design becomes a core pillar of digital product development, a refreshed simulation product data management has come to light. This article highlights Ansys’ use of Aras Innovator to deliver a vendor-neutral and open approach to SPDM.
Enterprise low-code: The next step in low-code
Low-code software has been around for decades and, with every re-emergence, the expectations are high. This article highlights recent advancement in low-code known as enterprise low-code. Enterprise low-code platforms offer a more strategic approach to application development with a higher level of functionality than traditional low-code solutions.
Jede Zeile zählt
Low-Code-Lösungen, die in eine PLM-Plattform eingebunden sind, beschleunigen die Produktentwicklung, fördern Innovationen und ermöglichen ein umfassendes Management des Produktlebenszyklus.
Benefits of an Enterprise Low-Code Platform for Manufacturers
Manufacturers are turning to technology as they navigate the impact of the pandemic. Find out how an enterprise low-code platform enables manufacturers to digitally transform on a digital platform, improving agility and resilience.
Aras Continues to Extend Its Low-Code Platform Capabilities to Build Intelligent Automation
With the latest open release of Aras Innovator, Aras provides further capabilities and enhancements to manage complex product digital twins and integrations across the digital thread—boosted with low-code application administration, advanced configurability and custom app development.
Aras Asserts Capabilities for Unit-Specific Digital Twin Configurations
Aras is competing for a very specific aspect of a digital twin initiative, a problem that hasn’t gotten much attention to date, but is absolutely critical for proper product operation analysis. Learn why Aras Digital Twin Core is a key differentiator.
Drei Neuheiten erleichtern die Arbeit mit 3D-Daten
Verbesserte Zusammenarbeit, weniger Aufwand für die Suche nach ähnlichen Produkten und frühzeitiges Interagieren mit den richtigen 3D-Daten – drei Produktneuheiten dazu stellen wir hier vor.
Digitalisiertes Produkt-Lebenszyklus-Management-Offen und zukunftssicher für die Produkte und Technologien der Zukunft
Die vierte industrielle Revolution ist kein leeres Schlagwort: Vernetzte und beschleunigte Märkte verlangen nach immer intelligenteren Produkten. Hersteller stehen vor der Aufgabe, diese in immer höherer Frequenz auf den Markt zu bringen und kontinuierlich zu optimieren. Das stellt das gesamte Produkt Lifecycle Management vor neue Herausforderungen. Nur ein erweiterter PLM-Ansatz, der nicht mehr nur CAD-zentriert ist, sondern alle Phasen der Produktentwicklung umfasst und digitalisiert, kann angesichts der neuen Herausforderungen helfen. In einem digitalisierten PLM sind Digitale Threads und Digitale Twins gemeinsam ein wichtiges Rückgrat, um Produkte zu entwickeln und dann kontinuierlich zu optimieren. Auf dieses haben verschiedensten Akteure Zugriff: Vom CAE-Experten über die Produktionsabteilung bis hin zum Service. Eine solche digitale Transformation des PLM kann dabei nur auf einer Plattformlösungen bauen, um sich flexibel an neue Anforderungen anzupassen. Nur sie bietet genügend Zukunftssicherheit, um mit der fortschreitenden Entwicklung von Markt und Technologien mitzuhalten.Fusce laoreet lobortis nulla, vel pulvinar felis lacinia id. Etiam dictum leo euismod aliquam feugiat. In vulputate pharetra elit vel iaculis. Sed a hendrerit arcu.
Dräger setzt auf Aras Innovator aus der Cloud
Eine moderne PLM-Plattform erleichtert die Digitalisierung der Geschäftsprozesse. Aras-Kunde Dräger, ein international führender Hersteller von Medizin- und Sicherheitstechnik, löst deshalb seine Oracle Agile e6-Installation durch Aras Innovator ab. Sowohl die neue PLM-Lösung, als auch die CAx- Anwendungen laufen künftig in der Cloud.Fusce laoreet lobortis nulla, vel pulvinar felis lacinia id. Etiam dictum leo euismod aliquam feugiat. In vulputate pharetra elit vel iaculis. Sed a hendrerit arcu.
Mehr Ordnung im Datenchaos: Moderne PLM-Ansätze in der Medizintechnik
Beim Product-Lifecycle-Management besteht in der Medizintechnik noch großer Nachholbedarf. Branchen wie der Anlagen- und Maschinenbau betreiben schon jetzt gezieltes Informationsmanagement. Oder sie integrieren Informationen über den ganzen Lebenszyklus eines Produktes hinweg mit Hilfe entsprechender Softwarelösungen. Im Medizinumfeld liegen aber noch immer Informationen vielfach nur in Form von Textdateien und Tabellenkalkulationen vor – von der ersten Idee über die Entwicklung, Produktion und die Wartung.
Das Versprechen von Big Data
Unternehmen der Fertigungsindustrie sammeln große Mengen an Daten entlang des gesamten Lebenszyklus eines Produkts: von der Analyse der Anforderungen und dem System-Engineering über Design, Entwicklung bis hin zu Produktion und Service. Doch eine zu große Menge an Daten kann unüberschaubar und verwirrend wirken: Die Daten liefern keine Informationen mehr, sondern nur noch Rauschen.
Draeger setzt auf PLM-Plattform Aras Innovator
Produkte von Dräger wie etwa Atemschutz- und Gasmessgeräte für Feuer- und Grubenwehren schützen, unterstützen und retten Menschenleben. Mit der PLM-Plattform Aras Innovator will sich das Unternehmen für die Herausforderungen der Digitalisierung wappnen.
Die Future PLM-Thesen werden (endlich) entdeckt
Voraussichtlich mehr als 5.500 Mitarbeiter in verschiedenen Entwicklungsbereichen werden die Aras-Software bei der Planung, Disposition, Durchführung und Dokumentation von Fahrzeugversuchen einsetzen. Für die BMW Group ist insbesondere die hohe Flexibilität von Aras Innovator relevant. Die spezifischen Anforderungen aus dem Versuchsumfeld der BMW Group lassen sich mit Aras umsetzen, weil die PLM-Plattform nicht nur vorhandene Standardfunktionen liefert, sondern auch tiefgreifende Anpassungen zulässt, heißt es in der Pressemitteilung, die zweifellos mit BMW abgestimmt ist.
Das Gedächtnis des digitalen Zwillings
Auf Unternehmensebene finden sich, je nach Einsatzbereich, zahlreiche unterschiedliche Systeme. In diesem Wust gehen zwangsläufig auch Daten unter beziehungsweise deren Kontext geht verloren. Eine Product Innovation-Plattform kann dabei helfen, das Potenzial der anfallenden Daten zu nutzen und sie in den richtigen Kontext zu setzten.
BMW setzt auf Aras Innovator
In der Fahrzeugentwicklung setzt BMW auf ein neues PLM-System – Zunächst soll Aras Innovator im Versuchsmanagement der integralen Sicherheit zum Einsatz kommen.
Aras kauft MRO-Funktionen von Infospectrum
Aras hat Impresa MRO von Infospectrum erworben. Die Lösung ermöglicht es Unternehmen, die Entwicklung und Wartung von Anlagen digital zu transformieren.
Wo gibt es das noch? Aras präsentiert Produkt-Roadmap
Produkt-Roadmap und Release-Plan? Papierblöcke zum Mitschreiben? Im Vergleich zu den visionären Anwenderkonferenzen der großen Mitbewerber, die ich in den letzten Wochen besucht habe, war die Aras ACE 2017 in München geradezu erfrischend altmodisch. Was nicht heißen soll, dass Aras keine Vision hätte. Ähnlich wie Siemens PLM Software positioniert der 2000 gegründete „PLM-Newcomer“ seine Software als Product Innovation Platform, die Kunden bei der digitalen Transformation ihrer Geschäftsprozesse unterstützen soll; nicht nur in Entwicklung und Fertigung, sondern künftig auch im Kundendienst.
ACE 2017 Europe in München
Mehr als 300 Teilnehmer verzeichnete Aras bei der diesjährigen europäischen Kundenveranstaltung ACE 2017 Europe, die am 21. und 22. November in München stattfand. Eine deutliche Steigerung um fast 100 Teilnehmer gegenüber dem vergangenen Jahr.
Excel「アングラPLM」の限界、製造業に高まるプラットフォームの必要性
「ビジネスのデジタル化」「デジタルトランスフォーメーション(DX)」などの言葉は製造業でも無縁なものではない。自動運転車のような先進事例に対応していくためには、設計や情報管理のやり方も変わらなくてはならないとアラスジャパンの久次氏は訴える。
Boston Business Journal, “GE Ventures adds to $40M round for Andover industrial software company”
“To power the next wave of global industrial productivity, GE is investing in critical foundational capabilities for the Industrial Internet," Steve Taub, the managing director of advanced manufacturing and enterprise at GE Ventures, said in a statement.
New $40 Million Investment in Aras
Given the amount invested and the reputation of the investors, CIMdata sees this as well-deserved recognition of Aras’ position in the global PLM industry, as well as their future potential. Their innovative technology and business model are well proven at this point and continue to gain traction in the marketplace.
“On Par with the cPDm Leaders” – Why Aras is Recognized as a New Member of the PLM Elite
Aras has managed to produce a solution that effectively covers what tend to be weak spots in large corporation’s PLM environments: supplier collaboration and simplicity to upgrade. Add in the fact that there are no license fees (Aras is free to download) and it becomes obvious that the solution has a couple very hard-to-resist advantages.
PLM is Hot Again: Aras Announces $40 Million Investment
“Aras embodies this strategy with a game-changing platform and ‘SaaS Anywhere’ approach that has proven very compelling to customers, and we are excited about Aras’ next stage of growth." -Martin Fichtner, managing director of Silver Lake Kraftwerk.
T-Systems PDM Workbench 5.0 available
The T-Systems International PDM Workbench 5.0 is available and provides a bunch of new and improved functionality. New “Rep Types” can be defined as non-BOM relevant CAD Documents, e.g. “CAD_KIN” for kinematics. All “Rep Types” can be handled easily with the full CATIA-integrated GUI of PDM Workbench. A step to improve usability in large structures like Aerospace is the possibility to load just portions of a structure, but maintaining the geometrical context – hence reducing data traffic and load time in CATIA. Also the handling of configuration information is improved by enabling the handling directly within CATIA. Please visit our homepage to see the full list of new functionality in the release notes.
T-Systems PDM Workbench 6.0
The T-Systems International PDM Workbench 6.0 is available and provides a bunch of new and improved functionality. Focus with this release was improving download performance by enabling the release cached. Now it is possible to save even more time for the designers. Also options for only loading visualization is available. Please visit our homepage to see the full list of new functionality in the release notes.
Aras Extends Digital Thread into Manufacturing and Service with Latest Open Release of Aras PLM Platform
“With this latest release of Aras Innovator, we continue to expand the Aras PLM Platform, whether building out the Quality Management System application for the specific needs of quality professionals or extending the platform to connect Engineering, Manufacturing, and Service to enable Digital Thread."
Aras Innovator Updated for Quality Management
Quality management professionals face the challenge of quickly responding to quality issues and communicating change requirements enterprise-wide. The new Quality Systems (QS) component in Aras QMS connects the proactive and reactive aspects of quality management, and fully integrates quality processes into engineering and manufacturing.
Aras Outlines its Platform Approach to PLM at ACE 2017 Conference
"We are on fire, the company, since about 2013-2014 has been growing,” said Aras CEO Peter Schroer during his ACE 2017 keynote presentation in front of a slide showing a 51% compound annual growth rate. “I gotta say … it’s because of you guys. The community is pushing us to continue to expand the product, build the scalability, build out the partner community so we can cover you everywhere. I would say the switch to open source, the opening up of everything we do — it’s an experiment and it’s played out perfectly.”
Aras PLM Platform Intended to Extend Digital Thread into Manufacturing and Service
Aras Quality Systems enables Closed-loop corrective action/preventive action (CAPA) – accelerates identification, containment, and analysis of issues, and tracking of affected items; Root cause analysis (RCA) – offers a variety of RCA tools; fault tree analysis, fishbone analysis, and five whys; collaboration – supports quality review through Visual Collaboration, business rules and workflow, and aggregation and packaging of CAP items; and Reporting – provides 8D reporting and tracking of CAPA metrics (% closed, % due).
Former Siemens PLM CEO Joins Aras
Even more surprising is the announcement from Aras CEO Peter Schroer that the company has appointed Tony Affuso, Siemens PLM's former CEO and a seasoned PLM expert, to its Board of Directors. Tony Affuso was the one responsible for pushing through the deal in which Siemens acquired UGS. This purchase added NX and I-deas (high end CAD), Solid Edge (mainstream CAD), Teamcenter (PDM/PLM), Nastran and Femap (CAE), Tecnomatix and more to the Siemens portfolio.
Hitachi Selects Aras to Standardize Design, Development Processes
Hitachi Industrial Equipment Systems Co., Ltd. has selected Aras Innovator to standardize management of drawings, data, design and development processes of the company’s wide portfolio of products. After implementation with Aras Certified Partner Hitachi Systems, Aras will standardize processes in engineering data management and workflow management across the company’s main manufacturing plants in Japan, Thailand and China.
SofTech Group Connector 7.1 Available
The SofTech Group Connector 7.1 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Group Connector 7.1 has been validated with Aras Innovator 11.0 SP7-SP9; along with Autodesk AutoCAD and AutoCAD Mechanical (2015, 2016, 2017); Autodesk Inventor (2015, 2016, 2017); and SolidWorks (2015, 2016, 2017). For additional information on the SofTech Group Connectors including datasheets and videos, please visit: http://www.softechgroupinc.com/products/softech-group-connectors
Aras Announces Huntington Ingalls, Microsoft, and IBM to Headline ACE 2017 Customer Conference
Each year, ACE brings together global industry and technology leaders to exchange best practices on managing complex product development and transforming the science of engineering to the business of engineering.
Aras Announces Huntington Ingalls, Microsoft, and IBM to Headline ACE 2017 Customer Conference
Aras today announced key industry presentations and sessions for ACE 2017, the company’s marquee customer conference taking place on March 21st to 23rd in Nashville, TN. The gathering is the premier event that connects the most innovative product development, IT, and manufacturing teams from Automotive, Aerospace & Defense, High Tech Electronics, and Industrial Manufacturing to shape the future of PLM.
Aras Announces Industry Presentations for ACE 2017
ACE 2017 features business presentations from Huntington Ingalls, Microsoft, Valley Fine Foods, IBM, Akrapovič, Carestream, Sandia, Lord, Pabst, and other industry leaders. In addition, application and demo tracks feature overviews of the latest version of the Aras PLM Platform, including MPP, Tech Docs, and Quality Management, and presentations on PLM implementation strategy.
Boeing, Airbus and the Hardship of Dealing with PLM Obsolescence
Former French president Charles de Gaulle once famously complained about the difficulty of governing a country that had 246 different kinds of cheese. In the time since that statement was made, life for both societies and enterprises has become even more complicated, and the hardship of ruling diversity, illustrated by this “cheese analogy,” has grown exponentially
IBM launches new Digital Twin and Platform capabilities for Watson Internet of Things
IBM, Aras Corporation and OSI Soft today are launching new IBM Digital Twin capabilities, to create multiple views of products by bringing together various ‘digital threads’ and data streams that can be tailored to the needs of a particular user.
Schaeffler Group Selects Aras for Engineering Cockpit for 20,000 Users
Digital transformation is one of the key issues at Schaeffler. The Engineering Cockpit application is one of the central tools to connect all disciplines and systems. The Engineering Cockpit is a web-based application allowing direct access to development data for a large number of development centers. It supports the company-wide configuration and change management in the initial phase.
Schaeffler Selects Aras Innovator for Engineering Cockpit
Schaeffler´s Engineering Cockpit provides up to 20,000 users with role-based access to information across multiple disciplines, interfaces, systems, and authoring tools to make better decisions. The collaboration with Schaeffler is the first result of the partnership between Aras and IBM that was announced in December last year.
IBM and Aras Reseller Agreement to Enable IoT Product Design, Enhance PLM Software Market
TEC’s principal analyst PJ Jakovljevic what this deal means for the future of product development and what product companies stand to gain in the era of digital transformation.
LORD Corporation Selects Aras PLM Platform to Standardize Product Development Processes, Manage Growth
LORD Corporation, a global manufacturer of adhesives, coating, sensing and motion technologies, selected Aras Innovator® to standardize product development processes at current sites, and to help the company efficiently support emerging businesses. When fully implemented, LORD anticipates more than 1,000 users will access Document Management, Configuration Management, Engineering Change Management, as well as Quality Systems (CAPA) applications as part of the Aras PLM platform.
LORD Corporation Selects Aras PLM Platform to Standardize Product Development Processes, Manage Growth
LORD Corporation is transforming their business of engineering due to the flexibility, scalability, and common architecture offered by Aras PLM. The company is better positioned to easily and quickly integrate new acquisitions, while standardizing current engineering and product development sites onto one common platform.
LORD Selects Aras PLM Platform
LORD, a leading global manufacturer of adhesives, coating, sensing and motion technologies, selected Aras Innovator due to a scalable, robust and flexible PLM capabilities to accommodate changing business and market condition, as well as future acquisitions anticipated by the manufacturer, a model-based, service-oriented architecture that delivers low total cost of ownership without reducing the long term vision of the project and more.
SofTech Group Connector 7.0 Available
The SofTech Group Connector 7.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Group Connector 7.0 has been validated with Aras Innovator 11.0 SP7-SP8; along with Autodesk AutoCAD and AutoCAD Mechanical (2015, 2016, 2017); Autodesk Inventor (2015, 2016, 2017); and SolidWorks (2015, 2016, 2017). For additional information on the SofTech Group Connectors including datasheets and videos, please visit: http://www.softechgroupinc.com/products/softech-group-connectors
SofTech Connector 6.0 Available
The SofTech Connector 6.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Connector 6.0 has been validated with Aras Innovator 10.0 SP4-SP5 and Aras Innovator 11.0 SP0-SP5; along with Autodesk AutoCAD (2013, 2014, 2015, 2016); Autodesk Inventor (2013, 2014, 2015, 2016); CADRA 20; and SolidWorks (2013, 2014, 2015, 2016). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
KISTERS North America Hires Sales Executive for its Enterprise Content Management Solutions
KISTERS North America, Inc. announced that it has hired James Eardly to manage North American sales and support for its 3DViewStation viewing tool which makes design data visually available for the whole enterprise. Kisters 3DViewStation is Aras Digital Mockup solution.
SofTech Connector 5.1 Available
The SofTech Connector 5.1 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator. SofTech Connector 5.1 has been validated with Aras Innovator 10.0 SP4 and Aras Innovator 11.0 SP0; along with Autodesk AutoCAD (2013, 2014, 2015); Autodesk Inventor (2013, 2014, 2015); CADRA 20; and SolidWorks (2013, 2014, 2015). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
NorthRidge Announces Support for Aras Innovator 11
NorthRidge Software, LLC has validated support for Aras Innovator 11 on the current Discover Innovator 3.6 release. This extends support for the most intuitive and powerful search solution for Innovator users to Aras 9.3, 9.4, 10 and 11.
SofTech Connector 5.0 for Aras Available
The SofTech Connector 5.0 release provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. SofTech Connector 5.0 has been validated with Aras Innovator 10.0 SP0-SP4, and 9.4 SP0-SP2; along with Autodesk AutoCAD (2013, 2014, 2015); Autodesk Inventor (2013, 2014, 2015); CADRA 20; and SolidWorks (2013, 2014, 2015). For additional information on the SofTech Connectors including datasheets and videos, please visit: http://www.softech.com/products/softech-connectors
KISTERS 3DViewStation V2014.2
There have been several enhancements in the area of file formats: support for Catia V5-6 2014 (R24), Creo 3, Inventor 2015 and SolidEdge ST7 has been added. Besides Catia drawings 3DViewStation now support reading of 2D PDF as the general 2D reading strategy. For the special case of PDF 3DViewStation now loads PDF in 2D mode first and after clicking on it will load the 3D object in a separate window for further analysis. 3DViewStation does not only support reading of PMIs and PMI views, but also allows to export PMIs and translates markups and dimensions into PMIs during export. For customer who prefer to use Adobe Reader in some processes, 3DViewStation now offers a new template incl. views carousel and editable form fields, which might get populated via an associated XML during runtime, even in an integrated environment. With PDF the part list item to geometry and PMI to feature associativity will be retained.
New Version Connector 4.5 for Aras Available
SofTech’s Connector 4.5 provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 4.5 has been validated with Aras Innovator 10.0 SP0-SP3, 9.4 SP0-SP2, 9.3 SP8 and SP9; along with Autodesk AutoCAD (2012, 2013, 2014); Autodesk Inventor (2011, 2012, 2013, 2014); CADRA 20; and SolidWorks (2010, 2011, 2012, 2013, 2014). For additional information on SofTech’s Connectors including datasheets and videos, please visit: http://www.softech.com/products/connectors-for-aras
KISTERS 3DViewStation V2014.1
After many customer requests Catia 2D drawing support has been added to KISTERS 3DViewStation. This is the beginning of adding more 2D file formats – 2D-PDF will be the next. Drawings as well as 3D parts or assemblies can be printed now, even on large format printing devices, including grid, markups and stamps to i.e. add printing time or document name, if desired. Also frequently asked for has been the undo-function, now allowing to undo selections, color changes, movements, dimensions and more.
New Version CAD Connector 4.4 for Aras Available
SofTech’s Connector 4.4 provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 4.4 has been validated with Aras Innovator 10.0 SP0 and SP1, 9.4 SP0 and SP1, 9.3 SP8 and SP9; along with Autodesk AutoCAD (2012, 2013, 2014); Autodesk Inventor (2011, 2012, 2013, 2014); CADRA 20; and SolidWorks (2010, 2011, 2012, 2013, 2014). For additional information on SofTech’s Connectors including datasheets and videos, please visit: http://www.softech.com/products/connectors-for-aras
株式会社ADSが、医療機器メーカー向けArasソリューション『Medical Device PLM』の提供開始
株式会社ADSは、医療機器メーカー向けソリューション『Medical Device PLM』 の提供を開始しました。 本ソリューションは、米国FDAの規制などのレギュレーション対応としてデンマー クのMinerva社が開発したAras Innovator向けソリューションです。 Minerva社 Medical Device PLM の特徴 - 成果物一覧からのDMR、DHRの作成 - ルールベースの成果物管理 - ダイナミックなDMR,DHF管理 - ベースラインの自動生成 ADSでは、今後、本ソリューションの日本語化対応、Aras Innovator CAPAソリューションとの連携を図ることで、日本の医療機器メーカーに求められる品質管理/規制対応要件をトータルでサポート致します。 ご興味のあるお客様は、info@adstr.co.jpまでお問合せください。 また、第25回設計製造ソリューション展にもArasブースにて出展致しますので、ぜひ、ご来場ください。
User interface customization and BREP export: KISTERS 3DViewStation V2014
3DViewStation V2014 ships with a fresh Office 2013 compliant user interface and provides functionality, which can be leveraged by the user quite intuitively. The focus of the latest developments has been set to customization of the user interface and BREP export capabilities.
The KISTERS 3DViewStation now provides several additional ways of UI customization: a pure left mouse button mode has been added to simplify the usage for occasional and also tablet-PC (finger) users. Mouse users now can determine, which functions should be performed when pressing the middle or right mouse button. The quick access toolbar can be customized and is pre-set now, so that frequently used functions are available without accessing the ribbon menu. Also, accelerator keys are defined for several functions and can be customized as per the user’s needs. Finally via XML the complete UI of the KISTERS 3DViewStation can be redefined.
3D CAD viewer for mobile users
KISTERS has announced the support for mobile users with the need for powerful 3D CAD viewers. The KISTERS 3DViewStation product family is available on many mobile devices and is known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data.
KISTERS 3DViewStation V12.03
Kisters presented the upcoming integration into Aras Innovator during ACE Europe last month. Today KISTERS has announced the release 12.03 of the 3DViewStation, known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data. We presented the upcoming integration into Aras Innovator during ACE Europe last month. The focus of the latest developments has been set to analysis functionality.
NTT DATA, a Global IT service provider, joins Aras partner program
Based on Aras Innovator, NTT DATA provides services and solutions for the Aras Community. As an end-to-end IT service provider NTT DATA offers high-end strategy and process consulting, implementation and maintenance for its customers. Focused on the Automotive, Aerospace and Manufacturing Industries, NTT DATA is an extremely experienced partner in data management and migration, project management, product development and collaborative engineering. Our experts have already proven their skills and delivered excellent services in customer-projects. You can get in contact with us personally at ACE Europe 2013 in Bad Soden. We are looking forward to a successful partnership with Aras Corp.
NTT DATA is introducing a new Aras solution
NTT DATA, a Global IT service provider and new Aras partner, is proud to present a new Aras solution at Ace Europe 2013 in Bad Soden.
We have created an easy, extensible, efficient and GEnIUS solution to change the way you work with Aras Innovator. Our solution is the implementation of global customer requirements into a next generation integration platform based on ARAS Innovator project experiences. NTT DATA’s GEnIUS is enabling integration across multiple authoring tools using one common user interface. For example, create your BOMs in MS Excel and save them to Aras Innovator, directly. Add or delete any parts or amounts in Excel and GEnIUS will do the rest on the Aras side – just do it. But Excel is only one of many supported tools. Stay informed, other tools will be named here soon and get in touch with GEnIUS personally at ACE Europe 2013 in Bad Soden.
1-Step assembly compare + sectioning + measurement: KISTERS 3DViewStation V12.02
KISTERS has announced the release 12.02 of the 3DViewStation. The KISTERS 3DViewStation is known for the modern user-interface, high performance 3D-viewing, current and mature CAD-importers plus a reasonable set of functional tools to view, analyze and communicate 3D-data. The focus of the latest developments has been set to management assembly comparison and analysis functionality.
Please review our BLOG-entries too: http://blog.kisters.de/?p=370 and http://blog.kisters.de/?p=376
3D-CAD-Viewer gets Bi-Turbo: KISTERS 3DViewStation V12.0
KISTERS 3DViewStation V12.0 ships with a fresh Office 2010 compliant user interface and provides a rich functionality, which can be leveraged by the user quite intuitively. The focus of the latest developments has been set to the graphics kernel. 3DViewStation load times are now unparalleled: in the meantime, we were almost unable to find assemblies, which load longer than 1 second, once translated into the internal 3DVS file format.
株式会社ADSは、米国SofTech社のテクニカル・パートナーになりました
株式会社ADSは、米国SofTech社と、Aras関連ビジネスにおける日本で最初のテクニカル・パートナーとなりました。
SofTech社は、オープンソースPLMシステム Aras Innovatorの米国パートナーとして、Aras Innovator向けCAD Connectorを開発しています。
- SolidWorks Connector for Aras
- Inventor Connector for Aras
- CADRA Connector for Aras
これらのCADコネクターについて、ご興味のあるお客様は、ADSまでお問い合わせください。
CycleOp is improving on the already great Express ECO's impact matrix
The improved express ECO features support for faster and full/partial loading of trees, support for check boxes and list boxes, support for substitutes and multiple row changes, and much, much more.
New Version Connector 3.0 for Aras Available
Connector 3.0 for Aras from SofTech provides you with the ability to manage your critical CAD information, including Documents, Parts and BOMs, while providing direct access to Aras Innovator PLM. Connector 3.0 currently supports Aras Innovator 9.3 along with CADRA 20, Autodesk Inventor (2011, 2012, 2013), and SolidWorks (2010, 2011, 2012, 2013).
For additional information on Connector 3.0 including datasheets, videos and upcoming webinars, please visit: http://www.softech.com/products/connectors-for-aras
New Version 3.3 of CATIA V5 CAD Connector (PDM Workbench) available
PDM Workbench (PWB) from T-Systems is an extension of CATIA V5 which provides integration of CAD-specific PDM functionality. PWB, designed as a CATIA V5 workbench, is dedicated to displaying and manipulating PDM data. It combines the control of PDM with the CAD superiority of CATIA V5 in a single user interface. PWB currently supports Aras Innovator 9.3. It enables the designer to take full advantage of PDM capabilities supporting collaborative product development, all within the CATIA V5 environment the designer is familiar with. New functionalities in version 3.3 are: - Basic Drawing Link support - Basic Multi Model Link support - Management of CATIA Templates in Aras Innovator - Enhanced PWB Update dialog: - PDM data management - Highlight of Geometries and PDM info - Aras Innovator Multi-Vault Support - Admin Mode for CATSettings - Replace from PDM - Insert from PDM - Auto name support using Innovator sequence items Additional materials for Download and videos on our website.
Minerva launches new Productivity Tool for Aras Innovator
The PDX standards define an XML encoding scheme that enables supply chain partners to exchange product content, changes and subsequent manufacturing information in a common language. This capability allows companies to exchange information through a single port of the exchange software rather than developing a different solution for each trading partner.
Download brochure and request a web demo on our website.
New Version 3.2 of CATIA V5 CAD Connector (PDM Workbench) available
PDM-Workbench (PWB) from T-Systems is an extension of CATIA V5 which provides integration of CAD-specific PDM functionality. PWB, designed as a CATIA V5 workbench, is dedicated to displaying and manipulating PDM data. It combines the control of PDM with the CAD superiority of CATIA V5 in a single user interface. PWB currently supports Aras Innovator 9.3. It enables the designer to take full advantage of PDM capabilities supporting collaborative product development, all within the CATIA V5 environment the designer is familiar with.
The vdR Group Announce their Partnership with Alcove9, Developers of Advanced Search Technologies
The vdR Group, business system integration specialists, and Alcove9, developers of open source advanced search technologies such as the a9 Hub, announce their partnership. The partnership improves the productivity of clients' critical business systems by combining the power of custom interoperability with advanced search capabilities. read more
DataSquare becomes PLM HOUSE
Since 1st of January 2012, DataSquare has merged with its sister company MEAIS GmbH & Co. KG to become DataSquare GmbH. With this step, we can bundle the competencies of both former companies under the roof of our newly created PLM HOUSE, in order to offer our clients even more comprehensive consulting for successful Product Lifecycle Management. Visit the new DataSquare website for further information.
Estrix of Spain to be Non Exclusive VAR for Plural's Apparel Innovator
Plural Technology, the only open source PLM provider for Apparel Industry, announced today the recent signing of an agreement with Estrix Spain, a software reseller and consulting company. Plural’s Flagship product Apparel Innovator is the only open source PLM tool available in the market. Apparel Innovator has various modules like Product development, Sourcing, Project Management, BI Reporting available out of the box. Estrix holds a prominent place in Spain’s Apparel Market as Business Management consulting company. For more information please visit www.pluraltechnology.com
Minerva launching new tool for Aras Innovator
A company implementing PLM faces many challenges. One of the typical challenges is to get data from sources like CAD into the PLM system. Having an automatic integration between the PLM system and CAD is an option, but it is often costly, and for many companies the number of CAD users is too low to justify the investment.
DataSquare is CMII Europe Solution Partner
As the official source of CMII standards in Europe, the German Gesellschaft fuer KonfigurationsManagement mbH (GfKM) maintains the list of certified CMII providers. Due to the commitment to CMII, DataSquare has been awarded the title "Europe Solution Partner", being the fourth consulting firm to gain it. CMII Europe Solution Partner are consulting firms which employ consultants with the status "CMII Professional" and offer support for companies implementing CMII. This includes training, consulting and coaching as well as the execution of assessments.
Improve the Collaboration in the Extended Supply Chain by the Minerva Permissions Manager
To simplify the process of managing permissions for external partners in Aras Innovator®, Minerva has developed a new add-on solution. The Minerva Permissions Manager makes it possible and easy to give an external party access to certain parts, products or files in the Aras platform.
Minerva appoints new Product Manager
Minerva has appointed Thomas Skogen as Product Manager to strengthen the development and support of the growing number of Aras add-on solutions from Minerva.
Minerva launches Microsoft Office Connector for Aras
Minerva's Microsoft Office Connector for Aras provides an easy-to-use interface with advanced functionality allowing documents, spreadsheets and presentations to be managed by a robust PLM system. The focus at Minerva is to "Keep it simple". Simple commands like Open, Lock, Save and Unlock allow you to quickly come up to speed. Learn more and download a free 30 day trail of the Microsoft Office Connector for Aras today.
New CATIA V5 PDM-Workbench Connector for Aras Innovator by DataSquare & T-Systems
The PDM-Workbench from T-Systems is an extension of CATIA V5 from Dassault Systèmes. With the connector developed by DataSquare, the PDM-Workbench is integrated to Aras Innovator and serves as a CATIA V5 interface. The Aras Innovator PDM-Workbench Connector functions as a connection between the product structure of the PDM-Workbench and the Aras Innovator data model enabling bi-directional data exchange between CATIA V5 and the Aras PLM platform.
Updated release of the Aras Innovator E-mail Connector available
Now the Aras Innovator E-mail Connector from DataSquare is also available in an advanced, chargeable version. The release includes a new e-mail management assistant that makes mass processing and distribution of permissions possible. So, even very large quantities of e-mails are assigned quickly and easily to persons and items.
DataSquare Supports Reduced Rework Initiative for Company-Stabilization
The R2 „Reduced Rework“ Initiative seeks ways to avoid costs by reducing rework and corrective actions within the enterprise. It integrates all activities and strategies on reducing rework offered by "R2 Specialists" and used by "R2 Initiative Members" world-wide. DataSquare supports this initiative as R2 Specialist with consulting and software knowledge. DataSquare’s expertise in the areas of PLM and CMII supports the steps that are necessary to reduce rework significantly. At the same time DataSquare is able to build up an improved business process infrastructure using existing or new PLM software.
DataSquare Presents Aras Innovator OCR Connector
Aras Innovator OCR Connector enables the automated recognition of text inside typewritten documents that are stored as picture files within Aras Innovator. Based on rules, text is being taken over as property, so that documents can be filed and found automatically. With this capability, Aras Innovator OCR Connector creates the requirement to integrate documents from existing “paper workflows” into PLM processes, easy and fast.
CycleOp launches Hebrew Language PLM Blog
בלוג יולי – הגרסא החדשה של
Aras Innovator
בתחילת החודש (יולי 2011) שוחררה הגרסא החדשה של
גרסא Aras Innovator – 9.3.0
אישית – חיכיתי בכיליון עיניים לגרסא החדשה כיוון שהיא כוללת בתוכה אוסף עצום של יכולות חדשות וחזקות במיוחד.
Shapespace Technology Delivers Advanced 3D Search for Aras
The ShapeSpace 3D Search tool for Aras extends the searching capabilities of Aras to enable searching by shape. For the first time, this puts advanced and affordable 3D search capabilities into the hands of organizations giving them the opportunity to improve part re-use, reduce the part number counts, aggregate and consolidate bought in parts, and drastically reduce external spend.
Do Your Detective Work in 3D
Imagine an organisation with thousands of products broken down into tens of thousands of parts. Now consider their drawings repository, all tagged with non-uniform descriptions and part numbers, often shared across several departments and offices. What a nightmare! How do they find a specific part in a hurry? Hope the description was entered intuitively? Rely on the accuracy of the part number? What about duplicates – aren’t they costly and confusing? ShapeSpace solves the problem. Shape-Space is a unique 3D search engine which enables you to re-organise, re-catalogue and eradicate duplicates in your massive drawings archive in hours.
Open Source
I ett telefonsamtal i veckan med Leon Lauritsen på Minerva i Danmark talar vi om att man i varje samtal där begreppet "open source" förekommer, först behöver enas om vad det betyder. Leon är representant för Aras Innovator (PLM) som använder uttrycket Enterprise Open Source om sin produkt. Han säger också att open source-budskapet ibland gör kunderna oroliga. Att köpa eller hyra ett program är liksom enkelt. Men när det handlar om open source så blir affärsmodellen betraktad från alla håll den också, inte bara själva produkten som kan komma att användas. Och det är klart att det inte är så dumt att syna sina affärspartners oavsett om det handlar om ett köp, hyra eller "open source-användning". Men inget säger egentligen att det skulle vara helt tryggt att köpa och hyra eller helt otryggt att ta hem en vara "open source"? Det handlar kanske mera om att vänja sig vid modellen. Det menar i alla fall de som jobbar med "open source".
Shape Searches Eliminate Duplication
Because design engineers often lack browse and search capabilities, the business of finding a part within a large component library can be complex and time consuming, especially when the name or part number is unknown. Naturally, this problem tends to make finding and reusing existing parts extremely difficult. A solution to this problem is available in the form of ShapeSpace, a 3D shape search technology provides engineering companies with a comprehensive 3D CAD search tool.
A Leaner Manufacturing Case Study
Control valve manufacturer Bifold wanted to drive changes in their manufacturing processes which would cut costs and deliver measurable improvements in reliability and performance. Using ShapeSpace 3D search technology to search their entire part reference library and identify all parts manufactured from the same raw material, Bifold were very quickly able to consolidate manufacturing processes and improve efficiencies. “As well as being leaner, greener and more efficient, we are able to turn around customer orders in a more reliable timeframe as the majority of parts are always ‘on the shelf’," said Mike Peacock, General Manager at Bifold.
Variantenmanagement: Neue Aras-Anwendung ermöglicht Gleichteilestrategie bei maximaler Variabilität
Moderne Produktplattformen führen zu mehr Qualität, geringeren Kosten und kürzerer Time-to-Market
PLM-Lösung von Aras ermöglicht JTEKT mehr Flexibilität und Kalkulationssicherheit bei der Auftragsfertigung
Spezialist für industrielle Wärmebehandlungsanlagen optimiert sein Datenmanagement
Mehr Wunsch als Wirklichkeit
In der Frage nach dem digitalen Reifegrad überschätzen sich viele europäische Industrieunternehmen. Die Automobilbranche hebt sich vom Durchschnitt allerdings ab.
Schiffswartung: MacGregor erweitert mithilfe von Aras den Funktionsumfang seiner Monitoring-Lösung OnWatch Scout
Echtzeit-Analysen, noch mehr Benutzerfreundlichkeit und eine erweiterte Datenkontrolle
Aras von unabhängigem Marktforschungsunternehmen als führend im Product Lifecycle Management ausgezeichnet
Bestmögliche Bewertung in den Bereichen Compliance, Nachhaltigkeit, Green PLM Support, Digital Thread, Extended BOM, Software Bill und Varianten
Energiepreisspirale: Europas Industrie verschenkt enormes Einsparpotenzial
Die Hälfte des Verbrauchs kann noch eingespart werden
Der digitale Faden führt durchs Krisen-Labyrinth
Der Weg aus dem Labyrinth: Energiekosten, Inflation und Fachkräftemangel bereiten den Unternehmen weiterhin Sorgen. In einem Gastbeitrag für das Magazin RiskNET erläutert Aras-Geschäftsführer Jens Rollenmüller, wie Unternehmen mithilfe eines digitalen Fadens durch die Krise kommen.
GREEN DATA
Mit den zunehmenden Anforderungen an Unternehmen, über Klimaschutz, Compliance und Co. zu berichten, steigt auch die Menge der zu verarbeitenden Daten. Die beliebte Excel-Liste stößt irgendwann an Grenzen. Wie ESG-Managementsoftware helfen kann, strukturiert zu berichten – und Prozesse nachhaltig zu verbessern.
Europaweite Studie: Industrie stellt sich auf lang anhaltende Multikrise ein
90 Prozent der Unternehmen rechnen auch über 2023 hinaus mit großer Instabilität
Lückenlose Daten im Produktlebenszyklus
Produkt Lifecycle Management (PLM) ist eine wesentliche Voraussetzung für eine nachhaltige Kreislaufwirtschaft. Es hilft dabei, den Blick auf zusätzliche Qualitätsmerkmale in der Herstellung zu richten. Und nachhaltige Produkte haben besondere Qualität. Grammer zeigt, wie sich der Zusammenhang zwischen Nachhaltigkeit, Kreislaufwirtschaft und Qualitätsmanagement herstellen lässt.
Druckluft mieten statt Kompressoren kaufen
Bei Kompressor-Hersteller Tamturbo bilden produktbezogene Daten die Basis für den
Erfolg des Geschäftsmodells. Mit der PLM-Plattform von Aras stellen die Finnen sicher,
dass überall im Unternehmen Daten-Transparenz herrscht.
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Abschied von klassischer Produktfokussierung setzt Industrie unter Druck / Denken in Systemen bedingt stärkere interne und externe Vernetzung
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
ESG in der Industrie: Mit einem durchgängigen Datenmanagement die Nachhaltigkeitsziele erreichen
The Story Behind the Surprising Partnership Between AVEVA and Aras
Verdi Ogewell of Engineering.com shares his thoughts about Aras' strategic OEM licensing partnership with AVEVA, saying it is another recognition of the strength of the Aras Innovator platform and the joint venture with AVEVA is a feather in the cap for CEO, Roque Martin.
Industrial Digital Twin: AVEVA and Aras schließen strategische Partnerschaft
Gemeinsame Entwicklung von Lösungen für ein skalierbares Asset Lifecycle Management
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Laut der Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“ sind sich Deutschlands Unternehmen ihrer „Datenschätze“ zwar bewusst, schaffen es aber nicht, diese auch zu heben. Die Gründe reichen von fehlender Transparenz über Probleme bei der Konsolidierung bis hin zur immer noch vorhandenen Excel-Dominanz. Für die Studie hat die Produkt-Innovations-Plattform Aras mehr als 130 Top-Führungskräfte deutscher Unternehmen mit einem Umsatz von mindesten 100 Mio. Euro befragt.
Komplexe Entwicklungsprojekte mit Systems Engineering bewältigen
In nahezu allen Branchen werden Produkte heute immer intelligenter und enthalten immer mehr Software. Dadurch werden sie komplexer, ebenso ihre Entwicklung. Systems Engineering ist eine Denkweise, die bei Design und Fertigung dieser Produkte die Komplexität beherrschbar macht. Sie wird hier anhand von Beispielen aus der Automobilindustrie vorgestellt.
Automation und digitaler Zwilling im Schiffsbau: Sicher unterwegs auf allen Weltmeeren
Bureau Veritas, eine der wichtigsten Schiffsklassifizierungsgesellschaften und Offshore-Sicherheits- und Prüfstellen, hat sich für die PLM-Plattform Aras Innovator entschieden. Damit entwickelt das Unternehmen seine Prozesse für die Klassifizierung von Schiffen und Offshore-Anlagen weiter.
Wie ein PLM die Kreislaufwirtschaft abbildet
Die Automobilindustrie verbaut zunehmend nachhaltige und wiederverwertbare Materialien. Das Ziel ist eine vollständige Kreislaufwirtschaft. Um die damit verbundene Datenfülle beherrschen zu können, setzt der Zulieferer Grammer auf Product Lifecycle Management.
Von der Produktidee bis zur Zulassung – Aras-Plattform macht Medizintechnikunternehmen Ottobock innovativer und schneller
Product Lifecycle Management sorgt für effizienten, digitalen F&E-Workflow
Why Aras’ Roque Martin Bought Minerva, and the New Upcoming Ansys-Like Arrangements
Part two of Verdi Ogewell's conversation with Roque Martin and Peter Schroer explores the CEO transition, details about our recent Minerva merger, and the future of our platform.
Taking Aras PLM from a Thorn in the Side to a Real Threat
Aras’ founder, Peter Schroer, and CEO, Roque Martin, sat down with Verdi Ogewell of Engineering.com to discuss Aras’ growth among the other vendors in the market, what makes Aras and its platform stand out, and Roque’s mission as CEO.
Aras investiert in den Integrationsspezialisten XPLM, um Innovationen zu beschleunigen und weiterhin eine offene Connectivity -Lösung für Entwicklung und Produktion zu garantieren
Damit steht dem globalen Markt auch künftig ein starker, unabhängiger Anbieter für Connectivity-Technologien der nächsten Generation zur Verfügung.
Aras Invests in XPLM
CIMdata provides a brief overview of Aras’ investment in XPLM, saying that they are pleased to see that Aras is continuing to invest in openness that benefits the entire PLM economy including end user customers, ISV partners, and competitors alike.
Datenintegrität durch Automatisierung: IWT entscheidet sich für PLM-Lösung von Aras
Das Life-Science-Unternehmen organisiert über die Aras-Plattform kundenspezifische Anpassungen in der Produktion
Studie „Von Nachhaltigkeit bis Digitalisierung: Challenges 2022“
Ökologisches Produktdesign wird zum zentralen Hebel zur Erreichung der Nachhaltigkeitsziele / Der Einsatz recycelter Materialien legt weiter zu
Three steps to building a resilient enterprise ecosystem
Aras’ CRO, Rob McAveney, explains that if product data is used properly, it can deliver insights that allow businesses to pivot with agility when it needs to adapt to new requirements.
PLM-Trends 2022: Systeme, Kreisläufe und noch mehr Tempo
Das Product Lifecycle Management ist wichtig, um den Lebenszyklus eines Produkts zu dokumentieren. Im Zuge der Digitalisierung verschmelzen ehemals gezogene Grenzen zu ERP- und anderen zentralen Unternehmensanwendungen zunehmend. Auf welche Entwicklungen gilt es hier zu achten?